Structural mechanics of knitted fabrics for apparel and composite materials

doi:10.1108/09556220210437239

Login

Welcome:
Guest

Search for:

Browse:

Resources:

Our site has recently been upgraded & the page you requested has moved, so we have redirected you to the new location. Please amend your bookmarks.

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Online from: 1989

Subject Area: Mechanical & Materials Engineering

Content: Latest Issue | Latest Issue RSS | Previous Issues

Options: To add Favourites and Table of Contents Alerts please take a Emerald profile

Structural mechanics of knitted fabrics for apparel and composite materials

Document Information:
Title:	Structural mechanics of knitted fabrics for apparel and composite materials
Author(s):	Ron Postle, (University of New South Wales, Sydney, Australia)
Citation:	Ron Postle, (2002) "Structural mechanics of knitted fabrics for apparel and composite materials", International Journal of Clothing Science and Technology, Vol. 14 Iss: 3/4, pp.257 - 268
Keywords:	Knitwear, Physical properties
Article type:	Research Paper
DOI:	10.1108/09556220210437239 (Permanent URL)
Publisher:	MCB UP Ltd
Abstract:	The importance of fabric biaxial extension, in-plane compression, shear and bending properties, have been widely recognised by textile scientists and engineers for the evaluation of the three-dimensional formability and drape of textile materials in apparel products and three-dimensional preforms. In contrast to woven fabrics where bending and shear properties determine the fabric formability, knitted fabrics have very high formability as a direct result of their easy biaxial extension properties. This ability to form three-dimensional shapes using the biaxial extensibility of knitted structures enables these knitted textile materials to be utilised for a wide variety of close fitting apparel garments and shaped composite preforms. Some representative biaxial extension curves for the plain knitted structure are described in this paper. These curves illustrate an unusual shape for the load-extension curve of a textile material arising from the pre-tension or pre-stress. The pre-stress yields an initial high tensile modulus for the structure in contrast to the very low initial modulus characteristic of apparel textiles. Accordingly, for knitted textile materials, it is shown how biaxial extension of the fabric introduces a fabric pre-stress to maximise the three-dimensional fabric formability especially when subjected to transverse compression by the resin or matrix in a composite material. Typical uniaxial and biaxial tensile stress–strain curves for knitted fabrics are compared.