COMPEL - The international journal for computation and mathematics in electrical and electronic engineering: Volume 35 Issue 1

Subject:

Table of contents

Semi-analytical determination of inductances in windings with axial and azimuthal wires

Corentin Dumont de Chassart, Maxence Van Beneden, Virginie Kluyskens, Bruno Dehez

Optimizing an electromechanical device often requires a significant number of evaluations of the winding inductance. In order to reduce drastically the computing costs associated…

Shaping inductor geometry for casting functionally graded composites

Slawomir Golak, Mirosław Kordos

The attractiveness of functionally graded composites lies in the possibility of a gradual spatial change of their properties such as hardness, strength and wear resistance. The…

A comprehensive sensorless control of DFIG-based wind turbines

Taher Abedinzadeh, Sajjad Tohidi

The purpose of this paper is to present an improved approach for estimation of the rotor position and speed of doubly fed induction generator, which can be used in vector control…

General modeling of saturated AC machines for industrial drives

Mohamed Arbi Khlifi, Habib Rehaoulia

When magnetic saturation in ac machines is evolved, the theory of main flux saturation in d-q axes remains the best. Because of its simplicity, it is the most used in either…

Shape parameter selection for multi-quadrics function method in solving electromagnetic boundary value problems

Huaiqing Zhang, Chunxian Guo, Xiangfeng Su, Lin Chen

The multi-quadrics (MQ) function is a kind of radial basis function. And the MQ method has been successfully adopted as a type of meshless method in solving electromagnetic…

Characterization of signals consisting of multiple time-varying sinusoidal components

Julian Sotelo-Castañon, Jose Alberto Gutierrez-Robles, Pablo Moreno, Veronica Adriana Galván-Sánchez, Jorge Luis García-Sánchez, Eduardo Salvador Bañuelos-Cabral

Most systems have a non-linear (NL) behavior and measured signals reflect this non-linearity such that in general they are composed with more than one sinusoidal component. NL…

Joint power control and beamforming in MIMO relays

Shahriar Shirvani Moghaddam, Maryam Alibeigi

In this paper, a wireless network consisting of multiple source-destination pairs, which communicate peer-to-peer with the help of multiple Amplify-and-Forward relays is…

Recent progresses in bus-ducts design

J. Faiz, H. Ehya, A.M. Takbash, S. Shojaee, M. Hamidian, A. Ghorbani

Electrical energy distribution systems must be low losses systems in order to enhance the system efficiency. Therefore, it is preferred to distribute electrical energy by…

Electric field distribution and voltage breakdown modeling for any PN junction

N. Rouger

Scientists and engineers have been solving Poisson’s equation in PN junctions following two approaches: analytical solving or numerical methods. Although several efforts have been…

A novel structure of dithered nested digital delta sigma modulator with low-complexity low-spur for fractional frequency synthesizers

Seyed Ali Sadat Noori, Ebrahim Farshidi, Sirus Sadoughi

Digital Delta Sigma Modulator (DDSM) is used widely in electronic circuits including Radars, class-D power amplifiers and fractional frequency synthesizers. The purpose of this…

Static security enhancement using fuzzy particle swarm optimization

K. Pandiarajan, C.K. Babulal

The electric power system is a complex system, whose operating condition may not remain at a constant value. The various contingencies like outage of lines, transformers…

Particle capture of elliptic cross-section matrices for parallel stream high gradient magnetic separation

Xiayu Zheng, Yuhua Wang, Dongfang Lu

The purpose of this paper is to model the particle capture of elliptic magnetic matrices for parallel stream type high magnetic separation, which can be a guidance for the…

179

Analysis of self-excitation and performance characteristics of a single-phase self-excited induction generator by field-circuit method

Krzysztof Makowski, Aleksander Leicht

The purpose of this paper is to present analysis of an influence of rotor slots opening on self-excitation process, terminal voltage and performance characteristics of the…

Performance analysis of GFDM in various fading channels

Shravan Kumar Bandari, V.V. Mani, A. Drosopoulos

The purpose of this paper is to study the performance of generalized frequency division multiplexing (GFDM) in some frequency selective fading channels. The exact symbol error…

3267

Inter-turn short-circuit fault detection in saturable squirrel-cage induction motor using magnetic equivalent circuit model

Peyman Naderi

The purpose of this paper is to obtain an integrated method for inter-turn short circuit fault detection for the cage-rotor induction machine (CRIM) considering saturation effect…

A novel method for decaying DC component removal with regard to frequency fluctuations

Mohsen Tajdinian, Shahram Montaser Kouhsari, Kazem Mohseni, Mehdi Zareian Jahromi

Decaying DC component has important effect on extracting the fundamental component phasor. It directly affects the precision of protective relaying algorithms which act based on…

Blind source separation using higher order statistics in kernel space

Nianyun Liu, Jingsong Li, Quan Liu, Hang Su, Wei Wu

Higher order statistics (HOS)-based blind source separation (BSS) technique has been applied to separate data to obtain a better performance than second order statistics-based…

Multi-parameter mathematical model for determination of PC cluster total harmonic distortion of input current

Sasa Mujovic, Slobodan Djukanovic, Vladan Radulovic, Vladimir A. Katic

Low power devices with switched-mode power supply represent harmonic generating apparatus in widespread use nowadays. The influence of personal computers (PCs), which affect the…

Approximation of the time-dependent induction equation with advection using Whitney elements: Application to dynamo action

Caroline Nore, Houda Zaidi, Frederic Bouillault, Alain Bossavit, Jean-Luc Guermond

The purpose of this paper is to present a new formulation for taking into account the convective term due to an imposed velocity field in the induction equation in a code based on…

Extraction of microwave FET noise wave temperatures by using a novel neural approach

Vladica Ðorđević, Zlatica Marinković, Vera Marković, Olivera Pronić-Rančić

– The purpose of this paper is the development of an efficient approach for extraction of the microwave FET noise wave temperatures.

Multi-objective enhanced PSO algorithm for optimizing power losses and voltage deviation in power systems

Gonggui Chen, Lilan Liu, Yanyan Guo, Shanwai Huang

For one thing, despite the fact that it is popular to research the minimization of the power losses in power systems, the optimization of single objective seems insufficient to…

Cover of COMPEL - The international journal for computation and mathematics in electrical and electronic engineering

ISSN:

0332-1649

Online date, start – end:

1982

Copyright Holder:

Emerald Publishing Limited

Open Access:

hybrid

Editor:

  • Prof Jan Sykulski