Table of contents
Pressure indicating film characterization of pressure distribution in eutectic Au/Sn wafer‐to‐wafer bonding
D. Spicer, K. Lai, K. Kornelsen, A. Brennan, N. Belov, M. Wang, T‐K. Chou, J. Heck, T. Zhu, S. AkhlaghiThe purpose of this paper is to characterize pressure non‐uniformity in a wafer‐to‐wafer bond chamber using pressure sensitive paper.
Performance improvement of large area GaN MSM photodiode with thin AlGaN surface layer
L.S. Chuah, Z. Hassan, H. Abu HassanThe purpose of this paper is to propose a new structure of GaN based metal‐semiconductor‐metal (MSM) photodiode, in which a thin unintentionally doped n‐type AlGaN layer is added…
Ku band microwave studies of fritless strontium hexaferrite thick films
D.C. Kulkarni, Vijaya PuriThe aim of this paper is to investigate microwave Ku band absorbance, complex permittivity, and permeability of SrFe12O19 thick films by a simple and novel waveguide technique.
Structural and optical properties of Alx Iny Ga1−x−y N quaternary alloys grown on sapphire substrates by molecular beam epitaxy
M.A. Abid, H. Abu Hassan, Z. Hassan, S.S. Ng, S.K. Mohd Bakhori, N.H. Abd RaofThe purpose of this paper is to study the structural and optical characterization of Alx Iny Ga1−x−y N quaternary epilayers, which were grown on c‐plane (0001) sapphire substrates…
Study of Ge embedded inside porous silicon for potential MSM photodetector
A.F. Abd Rahim, M.R. Hashim, N.K. AliThe purpose of this paper is to describe a very low‐cost way to prepare Ge nano/microstructures by means of filling the material inside porous silicon (PS) using a conventional…
Parameters affecting the sensitivity of LTCC pressure sensors
Goran J. Radosavljević, Walter Smetana, Andrea M. Marić, Ljiljana D. Živanov, Michael Unger, Günther StanglThe purpose of this paper is to demonstrate the influence of material properties and fabrication technique on the performance of an embedded pressure sensor. Based on conducted…
Zinc oxide microrods prepared by sol‐gel immerse technique
Sharul Ashikin Kamaruddin, Mohd Zainizan Sahdan, Kah‐Yoong Chan, Mohamad Rusop, Hashim SaimZinc oxide (ZnO) is an emerging optoelectronic material due to its various functional behaviors. The purpose of this paper is to report on the fabrication and characterizations of…
Electrothermal modeling of hybrid power modules
Moez Ayadi, Mohamed Amine Fakhfakh, Moez Ghariani, Rafik NejiPower modules including the insulated gate bipolar transistor (IGBT) are widely used in the applications of motor drivers. The thermal behavior of these modules makes it important…
ISSN:
1356-5362Online date, start – end:
1982Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor John Atkinson