Numerical analysis of ablative behavior of silicone resin coated carbon fabric

Abstract

Purpose

The purpose of this paper is to study the ablative behavior of the silicone resin-coated carbon fabric (coated fabric) that will swell significantly during ablation.

Design/methodology/approach

The ablation experiments of three coated fabrics were conducted by quartz lamp radiant. Based on the experimental analysis, a numerical model was proposed for the coated fabrics to study the ablative process in term of the energy balance, mass conservation and thermal decomposition equations.

Findings

Results showed that the average relative errors between the simulated temperatures and experimental values of back surfaces of coated fabric 1, 2 and 3 were 10.01, 7.53 and 7.32%, respectively. The average density of silicone resin of coated fabric 1 was reduced by 47.96%, and the closer the distance from the heated surface was, the more the density decreased. The thermal conductivity and specific heat capacity of silicone resin of coated fabric 1 increased with time. Before 50 s, each decomposition rate curve showed an inflection point, at which the silicone resin decomposed most intensely.

Research limitations/implications

Based on experimental observations, the ablative behavior of the material with fixed expansion layer was simulated. In the further research, the moving expansion layer could be considered.

Originality/value

This paper provides the theoretical basis to evaluate the effectiveness of thermal protection materials that will swell during ablation.

Citation

Zheng, Z., Zhi, W., Mao, K., Zhang, Q. and Luo, L. (2020), "Numerical analysis of ablative behavior of silicone resin coated carbon fabric", Pigment & Resin Technology, Vol. 50 No. 1, pp. 66-73. https://doi.org/10.1108/PRT-03-2020-0019