Sustainability Criteria and Indicators for Road Infrastructure Projects

Abstract

The CEEQUAL certification system promotes sustainable development (SD) principles in infrastructure construction, with 12 categories of criteria and indicators. ENVISION assigns 60 points to five categories, while Green Guide is divided into seven classifications. SD certification requires 11 requirements, including an ecological assessment procedure, life-cycle costing assessment, quality control plan, noise mitigation plan, waste management plan, pollution prevention plan, low impact development, pavement management system, site maintenance plan, and educational outreach. SD certification technique provides 8 critical criteria, 153 standards, 17 stringent prerequisites, and 8 categories of points. Culp (2011) developed a grading system to incorporate SD principles into infrastructure projects; Shen et al. (2011) explored significant assessment parameters for the SD of infrastructure projects using the fuzzy set method; Lui and Cui (2012) studied SD frameworks for building projects, Montgomery et al. (2014) and Lim (2009) identified 77 major SD indicators based on a comprehensive review of the relevant literature, and the Transport Division of New South Wales established a Transportation Project Sustainability Framework to ensure the long-term viability of their transportation network and the continuous improvement of their environmental and sustainability performance. Assah Amiril (2014) revealed a global network of 27 SD criteria produced by professionals, for-profit and non-profit organizations, divided into five groups: ecological, financial, sociological, engineering, asset use, and project management. The most important details in this study are that 57 indicators were categorized into eight types, weighted according to their respective impacts, and the influence of each component on SD was evaluated using a 100-dimensional scale. This study investigated the eight criteria and the impact of three additional criteria (public participation, climate change response, and stakeholder management). This chapter examined the criteria and indicators of SD criteria and indicators for road infrastructure development in developing countries. The most important findings are that the CEEQUAL, Ugwu, Haupt, and Lim models are the most comprehensive theoretical models of SD requirements for infrastructure design, and that all frameworks and models promote the sharing, promotion, and acknowledgement of SD concepts.

Citation

Ametepey, S.O., Aigbavboa, C.O. and Thwala, W.D. (2023), "Sustainability Criteria and Indicators for Road Infrastructure Projects", Sustainable Road Infrastructure Project Implementation in Developing Countries: An Integrated Model, Emerald Publishing Limited, Leeds, pp. 65-79. https://doi.org/10.1108/978-1-83753-810-220231006