COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Issue(s) available: 201 – From Volume: 1 Issue: 1, to Volume: 43 Issue: 1
Volume 43
-
Issue 1 2024
Volume 42
Volume 41
Volume 39
Volume 38
Volume 37
Volume 36
Volume 35
Volume 34
-
Issue 4 2015
Volume 33
-
Issue 6 2014 Selected papers of the 17th International Symposium on Theoretical Electrical Engineering - ISTET 2013 (Pilsen, Czech Republic)
Volume 32
Volume 31
Volume 30
-
Issue 4 2011 Selected papers from the 15th International Symposium on Theoretical Electrical Engineering, ISTET09
-
Issue 3 2011 Selected papers from the 21st Symposium on Electromagnetic Phenomena in Nonlinear Circuits
-
Issue 2 2011
-
Issue 1 2011 Selected papers from the 4th International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER09
Volume 29
-
Issue 5 2010 Selected papers from the 18th International Conference on Electrical Machines, ICEM 2008
-
Issue 4 2010 Selected Papers from the 14th International Symposium on Electromagnetic Fields in Electrical Engineering ISEF2009
-
Issue 3 2010
-
Issue 2 2010 Selected papers from the International Conference on Wireless Systems Computation, Assembling and Compatibility CAC 2008
-
Issue 1 2010 Selected papers from the 13th Power Electronics and Motion Control Conference, EPEPEMC 2008
Volume 28
-
Issue 4 2009 Selected papers from the 13th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering
-
Issue 3 2009 Selected Papers from XX Symposium in Electromagnetic Phenomena in Nonlinear Circuits EPNC 2008
-
Issue 2 2009
-
Issue 1 2009 Selected papers from the 14th International Symposium on Theoretical Electrical Engineering ISTET 2007
Volume 27
-
Issue 6 2008 Special Section on the Third Edition of the Italian Workshop on Finite Element Method as Applied to Electrical and Information Engineering
-
Issue 5 2008 Papers from the International Conference on Power Electrical Systems, organized within the Fourth IEEE Multiconference on Systems, Signals and Devices
-
Issue 3 2008
-
Issue 2 2008 SPECIAL SECTION Selected Papers from the International Conference on Heating by Electromagnetic Sources
-
Issue 1 2008 Selected papers from the 7th International Symposium on Electric and Magnetic Fields, June 2006
Volume 26
-
Issue 5 2007
-
Issue 4 2007 Selected papers from the 19th Symposium on Electromagnetic Phenomena in Nonlinear Circuits 2006
-
Issue 3 2007 Selected papers from the 12th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, September 2006
-
Issue 2 2007 Selected papers from the 9th Workshop on Optimization and Inverse Problems in Electromagnetism, Sorrento 2006
-
Issue 1 2007 Selected papers from the 3rd International Conference on Systems, Signals and Devices, March 2005
Volume 25
A high-performance multilevel power supply for versatile induction heating processes
Ignacio Jesús Álvarez Gariburo, Hector Sarnago, Oscar LuciaInduction heating processes need to adapt to complex geometries or variable processes that require a high degree of flexibility in the induction heating setup. This is usually…
A topology optimization of on-chip planar inductor based on evolutional on/off method and CMA-ES
Takahiro Sato, Kota WatanabeThere are few reports that evolutional topology optimization methods are applied to the conductor geometry design problems. This paper aims to propose an evolutional topology…
A new winding homogenization method based on thermal resistance concept
Ali Hashemi, Parsa Yazdanpanah Qaraei, Mostafa Shabanian-PoodehThe aim of this paper is to provide a simple yet accurate and efficient geometric method for thermal homogenization of impregnated and non-impregnated coil winding technologies…
Analysis of current distribution and termination conditions in 2D metasurfaces
Sami Barmada, Nunzia Fontana, Leonardo Sandrolini, Mattia SimonazziThe purpose of this paper is to gain a better understanding on how metasurfaces behave, in terms of currents in each unit cell. A better knowledge of their behavior could lead to…
The influence of ITSF on vibration of high voltage Line-Start permanent magnet synchronous motor
Guanglu Yang, Si Chen, Jianwei Qiao, Yubao Liu, Fuwen Tian, Cunxiang YangThe purpose of this paper is to present the influence of inter-turn short circuit faults (ITSF) on electromagnetic vibration in high-voltage line-starting permanent magnet…
MRI compatible electromagnetic actuator: magneto-thermal design and optimization
Boussad Moualek, Simon Chauviere, Lamia Belguerras, Smail Mezani, Thierry LubinThe purpose of this study is to develop a magnetic resonance imaging (MRI)-safe iron-free electrical actuator for MR-guided surgical interventions.
Modelling permanent magnet excited uniform fields with rational approximations
Stefano Costa, Eugenio Costamagna, Paolo Di BarbaA novel method for modelling permanent magnets is investigated based on numerical approximations with rational functions. This study aims to introduce the AAA algorithm and other…
Modeling of novel cross-type hybrid 4-pole carrier system and experimental air gap control
Enes Mahmut Göker, Ahmet Fevzi Bozkurt, Kadir ErkanThe purpose of this paper is to introduce a novel cross (+) type yoke with hybrid electromagnets and new reluctance modeling to precisely calculate attraction force is given.
An improved and simplified approach for the steady-state analysis of self-excited induction generators using binary search algorithm
Essaki Raj R., Sundaramoorthy SridharThis paper aims at developing an improved method, based on binary search algorithm (BSA) for the steady-state analysis of self-excited induction generators (SEIGs), which are…
Numerical modeling of magnetic cores with combined electrical steel grades
Oussama-Ali Dabaj, Ronan Corin, Jean-Philippe Lecointe, Cristian Demian, Jonathan BlaszkowskiThis paper aims to investigate the impact of combining grain-oriented electrical steel (GOES) grades on specific iron losses and the flux density distribution within a…
An FEM framework for modeling forces between NdFeB magnets and HTS bulks
Guilherme Homrich, Aly Ferreira Flores Filho, Paulo Roberto Eckert, David George DorrellThis paper aims to introduce an alternative for modeling levitation forces between NdFeB magnets and bulks of high-temperature superconductors (HTS). The presented approach should…
Full harmonic spectrum calculation of magnetic pressures in synchronous permanent magnet machines based on a new realistic partial analytical model: application to SVPWM and DPWM2
Salma Benharref, Vincent Lanfranchi, Daniel Depernet, Tahar Hamiti, Sara BazharThe purpose of this paper is to propose a new method that allows to compare the magnetic pressures of different pulse width modulation (PWM) strategies in a fast and efficient way.
Uniform diffracted fields of the extended theory of BDW from the circular aperture on a perfectly magnetic conductive surface
Mustafa Altınel, Uğur YalçınThis paper aims to examine the uniform diffracted fields from a perfectly magnetic conductive (PMC) surface with the extended theory of boundary diffraction wave (BDW) approach.
Wind turbine emulator using three-phase IM controlled through an adaptive reactive power estimator fed by soft-VSI topology
Mouna Zerzeri, Intissar Moussa, Adel KhedherThe purpose of this paper aims to design a robust wind turbine emulator (WTE) based on a three-phase induction motor (3PIM).
Comparison of simulations of the gas conduction in HVDC GIL by application of nonlinear conductivity model and ion-drift-diffusion model
Hendrik Hensel, Markus ClemensGas insulated systems, such as gas insulated lines (GIL), use insulating gas, mostly sulfur hexalfluoride (SF6), to enable a higher dielectric strength compared to e.g. air…
Numerical modelling of heating and melting of metal in a mini industrial direct current electrical arc furnace
Sergejs Pavlovs, Andris Jakovičs, Alexander ChudnovskyThe purpose of this paper is the study of the electro-vortex flow (EVF) as well as heating and melting processes for mini industrial direct current electric arc furnace (DC EAF).
Analysis of data-driven approaches for radar target classification
Aysu Coşkun, Sándor BiliczThis study focuses on the classification of targets with varying shapes using radar cross section (RCS), which is influenced by the target’s shape. This study aims to develop a…
Optimizing IRE targeting using multi-electrode structure and biomedical multi-output generator
Borja López-Alonso, Pablo Briz, Hector Sarnago, José M. Burdio, Oscar LuciaThis paper aims to study the feasibility of proposed method to focus the electroporation ablation by mean of multi-output multi-electrode system.
A new approach for the flashover voltage prediction using an arc propagation reproduction on a high-voltage insulator
Dyhia Doufene, Samira Benharat, Abdelmoumen Essmine, Oussama Bouzegaou, Slimane BouazabiaThis paper aims to introduce a new numerical model that predicts the flashover voltage (FOV) value in the presence of polluted air surrounding a high-voltage insulator. The model…
Double-wall pipe-type power-frequency electromagnetic heating device with diversion ring and its heating mode optimization
Feng Zhou, Zixuan Wang, Yuxiang ZhaoThe purpose of this paper is to study the pipe-type electromagnetic induction heating device under power frequency condition.
ISSN:
0332-1649Online date, start – end:
1982Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Prof Jan Sykulski