To read this content please select one of the options below:

Computation of flow and heat transfer through channels with periodic dimple/protrusion walls using low-Reynolds number turbulence models

Mohammad Fazli (Hydraulic Machinery Research Institute, School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran)
Mehrdad Raisee (Hydraulic Machinery Research Institute, School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 11 February 2019

Issue publication date: 22 February 2019

281

Abstract

Purpose

This paper aims to predict turbulent flow and heat transfer through different channels with periodic dimple/protrusion walls. More specifically, the performance of various low-Re k-ε turbulence models in prediction of local heat transfer coefficient is evaluated.

Design/methodology/approach

Three low-Re number k-ε turbulence models (the zonal k-ε, the linear k-ε and the nonlinear k-ε) are used. Computations are performed for three geometries, namely, a channel with a single dimpled wall, a channel with double dimpled walls and a channel with a single dimple/protrusion wall. The predictions are obtained using an in house finite volume code.

Findings

The numerical predictions indicate that the nonlinear k-ε model predicts a larger recirculation bubble inside the dimple with stronger impingement and upwash flow than the zonal and linear k-ε models. The heat transfer results show that the zonal k-ε model returns weak thermal predictions in all test cases in comparison to other turbulence models. Use of the linear k-ε model leads to improvement in heat transfer predictions inside the dimples and their back rim. However, the most accurate thermal predictions are obtained via the nonlinear k-ε model. As expected, the replacement of the algebraic length-scale correction term with the differential version improves the heat transfer predictions of both linear and nonlinear k-ε models.

Originality/value

The most reliable turbulence model of the current study (i.e. nonlinear k-ε model) may be used for design and optimization of various thermal systems using dimples for heat transfer enhancement (e.g. heat exchangers and internal cooling system of gas turbine blades).

Keywords

Citation

Fazli, M. and Raisee, M. (2019), "Computation of flow and heat transfer through channels with periodic dimple/protrusion walls using low-Reynolds number turbulence models", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 29 No. 3, pp. 1178-1207. https://doi.org/10.1108/HFF-09-2018-0469

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles