To read this content please select one of the options below:

Best practice for measuring grid convergence in numerical models of alloy solidification

Igor Vušanović (Faculty of Mechanical Engineering, University of Montenegro, Podgorica, Montenegro.)
Vaughan R Voller (Department of Civil, Environmental, and Geo- Engineering, University of Minnesota, Minneapolis, Minnesota, United States.)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 7 March 2016

167

Abstract

Purpose

When a multi component alloy solidifies the redistribution of solute components leads to the formation of macrosegregation patterns. Blending ideas from a number of recent publications the purpose of this paper is to provide a “best practice” on how grid convergence of a given macrosegregation simulation can be measured and determined.

Design/methodology/approach

The best practice is arrived at by considering a benchmark problem consisting of a 2D-casting simulation of an idealized Al-4.5%Cu alloy in a side cooled square (76×76 mm) cavity. The model for this simulation is based on a mixture treatment of the relevant heat and mass transfer equations. Simulations are made using three increasingly refined grid sizes.

Findings

The best practice to determine grid resolution involves two steps: first, a visual evaluation of predicted segregation images leading to the evaluation of solute profiles along selected transects; and second, the construction of a cumulative distribution function (CDF) of the predicted segregation field. On application to the benchmark problem, it is concluded that current computer resources are insufficient to grid resolve macrosegregation patterns but that the CDF provides a useful signal of the nature of macrosegregation in a given system.

Research limitations/implications

The benchmark is chosen to be representative. Exact convergence behavior, however, may depend on the system chosen.

Originality/value

In addition to establishing a best practice for measuring grid resolution of macrosegregation simulations the work also highlights, even in the absence of complete grid convergence, how the recently proposed CDF treatment can inform solidification modeling and process understanding.

Keywords

Citation

Vušanović, I. and Voller, V.R. (2016), "Best practice for measuring grid convergence in numerical models of alloy solidification", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 26 No. 2, pp. 427-439. https://doi.org/10.1108/HFF-02-2015-0050

Publisher

:

Emerald Group Publishing Limited

Copyright © 2016, Emerald Group Publishing Limited

Related articles