Weaving thickness parameters of “8” shape 3D woven enhancing fabric
International Journal of Clothing Science and Technology
ISSN: 0955-6222
Article publication date: 2 October 2009
Abstract
Purpose
The purpose of this paper is to deduce the thickness property of three‐dimensional (3D) composite produced by 3D woven enhancing fabric based on an academic model.
Design/methodology/approach
Thickness of 3D composite is determined by the important weaving parameter – the length of binder yarn. According to the shape of pile formed by binder yarn, curve function of pile is supposed. A rapier loom is modified for the 3D woven enhancing fabrics, and the composite is produced based on the fabric. The thickness of composite is produced and the theories results are validated.
Findings
The result of the analysis shows that the curve of pile formed by binder yarn can be expressed as sin function approximately, and there is linear relation between the thickness of composite and the length of pile of binder yarn.
Research limitations/implications
The results cannot be provided to study the relationship of thickness based on different technology of composite.
Originality/value
The paper provides an academic method of calculating the thickness of composite and the relationship between the thickness of composite and the length of binder yarn. The method can reduce the testing time.
Keywords
Citation
Jihong, L., Hongxia, J. and Yuzheng, L. (2009), "Weaving thickness parameters of “8” shape 3D woven enhancing fabric", International Journal of Clothing Science and Technology, Vol. 21 No. 5, pp. 270-278. https://doi.org/10.1108/09556220910983768
Publisher
:Emerald Group Publishing Limited
Copyright © 2009, Emerald Group Publishing Limited