Impingement cooling in a rib‐roughened channel with cross‐flow

Abstract

A numerical investigation to determine the velocity and heat transfer characteristics of multiple impinging slot jets in rib‐roughened channels in the presence of cross‐flow has been carried out. Fluid flow is modeled using an explicit algebraic stress model. A simple eddy diffusivity and a generalized gradient diffusion hypothesis are applied for the modeling of turbulent heat fluxes. The computations are validated against available experimental fluid flow and heat transfer data. Different size and arrangement of jets and ribs are considered in detail, while the Reynolds numbers of a jet and the channel inlet are fixed at 6,000 and 14,000, respectively. Results show that the ratio (B/W) between the size of the jets and ribs is most important. An explanation is that the ribs inhibit the motion of eddies by preventing them from coming very close to the surface when B/W is low, e.g. B/W = 1, although the ribs will increase the turbulence intensity. This blockage limited the heat transfer enhancement effect of the ribs and impinging jets.

Citation

Jia, R., Rokni, M. and Sundén, B. (2001), "Impingement cooling in a rib‐roughened channel with cross‐flow", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 11 No. 7, pp. 642-662. https://doi.org/10.1108/09615530110403598