Equivalent relationship of accelerated corrosion and compilation method of environmental spectrum of corroded steel wires

Abstract

Purpose

This paper aims to investigate the equivalent relationship of accelerated corrosion and compilation method of environmental spectrum of corroded steel wires.

Design/methodology/approach

Based on Faraday’s law and the principle of equivalent corrosion damage, the method for compiling the equivalent environmental spectrum of accelerated corrosion was established. The equivalent conversion relationship of steel wire under different temperature and pH conditions and the relationship between corrosion factors and corrosion rate through the electrochemical tests were proposed.

Findings

The high temperature had a greater impact on the equivalent conversion coefficient than the low temperature. When the temperature increased from 15°C to 60°C, the equivalent conversion coefficient increased by about 3–6 times. The weak acid had a greater impact on equivalent conversion coefficient compared with strong acid. The effect of temperature on the equivalent conversion coefficient was much greater than that of pH value.

Originality/value

The compilation method of corrosion environment spectrum of bridge operation and the calculation method of corrosion depth proposed in this paper were reasonable, and the corrosion depth and service life of cable components could be predicted.

Citation

Li, R., Miao, C., Nie, M. and Wang, Y. (2022), "Equivalent relationship of accelerated corrosion and compilation method of environmental spectrum of corroded steel wires", Anti-Corrosion Methods and Materials, Vol. 69 No. 4, pp. 387-394. https://doi.org/10.1108/ACMM-01-2022-2597