Unstable tilt-rotor maximum likelihood wavelet-based identification from flight test data

Abstract

Purpose

The purpose of this paper is to present the methodology that was used to perform system identification of a dynamically unstable tilt-rotor from flight test data. The method incorporated wavelet transform into the maximum likelihood principle formulation, emphasizing both time and frequency responses. Using wavelets allowed to additionally filter noise in the data, and this increased the estimation quality. This approach did not require measurement and process noise modeling in contrast to the Kalman filter usage for parameter estimation.

Design/methodology/approach

In the study, lateral-directional stability and control derivatives of an unstable tiltrotor in hover were estimated. This was performed by applying the maximum likelihood output error method. The estimated model response was decomposed using the Mallat pyramid and matched to wavelet coefficients obtained directly from measurements. In addition, a coherence-based weighting function was used to put more emphasis on the most reliable data. For comparison, the same set of data was used to identify a model with the same structure using the maximum likelihood principle with an incorporated Kalman filter.

Findings

It was found that maximum likelihood principle and wavelet transform allowed for estimating aerodynamic coefficients of a dynamically unstable aircraft. The estimation was performed with high accuracy.

Practical implications

The designed method can be used for system identification of unstable aircraft and when additional noise is present (e.g. when noise due to turbulence was observable during the flight test or higher noise levels were present in the sensors data).

Originality/value

The paper presents verification of a wavelet-based maximum likelihood principle output error method using flight test data.

Citation

Lichota, P. (2023), "Unstable tilt-rotor maximum likelihood wavelet-based identification from flight test data", Aircraft Engineering and Aerospace Technology, Vol. 95 No. 8, pp. 1275-1285. https://doi.org/10.1108/AEAT-01-2023-0013