Conceptual design modeling by the novel aircraft conceptual design and analysis system (ACDAS)

Abstract

Purpose

Throughout an aircraft development process, the conceptual design phase is an extremely important milestone; hence, the quality and success of this step directly affect the overall cost and lead time of the project. Because of this fact, the purpose of this study is to provide outputs and suggestions to the designing engineer regarding the requirements for reducing overall design time as well as costs and creating an ideal design at the early phases of the project by optimizing the aircraft development process.

Design methodology approach

The system has been prepared parametrically and presents some performance specifications for the aircraft in the early phases of the design, for example, coefficients for lift C_L as well as drag C_D and weight as well as fuel estimations. The software uses a combination of well-known design techniques within just one platform in contrast to many other applications. Because of this feature, it is not needed to use different sub-platforms which would require an appropriate environment and even though would lead to complications with regard to the connectivity. The system also presents relevant information about the aircraft performance like velocity versus load factor (V-n) diagrams, maximum turn rate of climb, turn rate and climb angle graphs in contrast to many other open-source conceptual design platforms.

Findings

In this study, authentic General Dynamics F-16 Fighting Falcon and McDonnell Douglas F-15 Eagle data were used as input to the system, and advanced geometric and/or performance graphs were obtained and compared to the literature where a good agreement of the results was observed. These results with regard to the aircraft performance are typically product specific and quite rare in the literature. These data obtained by use of the software during the aircraft design are, thus, of major interest, especially for the design of new aerospace platforms. In this study, all of these graphs (especially the remarkable V-n diagram) are obtained on one platform.

Originality value

The aircraft conceptual design and analysis system software provides information and suggestions regarding the requirements for reducing the overall design time, reducing the design costs and creating an optimized design at the early phases of a project by optimizing the aircraft development process within just one convenient, that is, user friendly, platform, where it uses a combination of varying methodologies. Besides presenting one interface, which is quite typical for conceptual design tools, it allows applications of methods like vortex lattices and finite differences for obtaining aerodynamic performance parameters.

Citation

Ünal, N., Öz, Y. and Oktay, T. (2023), "Conceptual design modeling by the novel aircraft conceptual design and analysis system (ACDAS)", Aircraft Engineering and Aerospace Technology, Vol. 95 No. 5, pp. 799-813. https://doi.org/10.1108/AEAT-02-2022-0056