To read this content please select one of the options below:

Investigation on the unstructured rotational dynamic overset grids

He-yong Xu (National Key Laboratory of Science and Technology on Aerodynamic Design and Research, Northwestern Polytechnical University, Xi’an, China.)
Shi-long Xing (National Key Laboratory of Science and Technology on Aerodynamic Design and Research, Northwestern Polytechnical University, Xi’an, China.)
Zheng-yin Ye (National Key Laboratory of Science and Technology on Aerodynamic Design and Research, Northwestern Polytechnical University, Xi’an, China.)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 6 July 2015

238

Abstract

Purpose

The purpose of this paper is to investigate and improve a new method of unstructured rotational dynamic overset grids, which can be used to simulate the unsteady flows around rotational parts of aircraft.

Design/methodology/approach

The computational domain is decomposed into two sub-domains, namely, the rotational sub-domain which contains the rotational boundaries, and the stationary sub-domain which contains the remainder flow field including the stationary boundaries. The artificial boundaries and restriction boundaries are used as the restriction condition to generate the entire computational grid, and then the overset grids are established according to the radius parameters of artificial boundaries set previously. The deformation of rotational boundary is treated by using the linear spring analogy method which is suitable for the dynamic unstructured grid. The unsteady Navier-Stokes/Euler equations are solved separately in the rotational sub-domain and stationary sub-domain, and data coupling is accomplished through the overlapping area. The least squares method is used to interpolate the flow variables for the artificial boundary points with a higher calculating precision. Implicit lower-upper symmetric-Gauss-Seidel (LU-SGS) time stepping scheme is implemented to accelerate the inner iteration during the unsteady simulation.

Findings

The airfoil steady flow, airfoil pitching unsteady flow, three-dimensional (3-D) rotor flow field, rotor-fuselage interaction unsteady flow field and the flutter exciting system unsteady flow field are numerically simulated, and the results have good agreements with the experimental data. It is shown that the present method is valid and efficient for the prediction of complicated unsteady problems which contain rotational dynamic boundaries.

Research limitations/implications

The results are entirely based on computational fluid dynamics (CFD), and the 3D simulations are based on the Euler equations in which the viscous effect is ignored. The current work shows further applicable potential to simulate unsteady flow around rotational parts of aircraft.

Practical implications

The current study can be used to simulate the two-dimensional airfoil pitching, 3-D rotor flow field, rotor-fuselage interaction and the flutter exciting system unsteady flow. The work will help the aircraft designer to get the unsteady flow character around rotational parts of aircraft.

Originality/value

A new type of rotational dynamic overset grids is presented and validated, and the current work has a significant contribution to the development of unstructured rotational dynamic overset grids.

Keywords

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant Nos. 11202166, and 11472223), the Fundamental Research Funds for the Central Universities (Grant No. 310-2012-JC19), and the Soaring Star Encouragement Program of Northwestern Polytechnical University.

Citation

Xu, H.-y., Xing, S.-l. and Ye, Z.-y. (2015), "Investigation on the unstructured rotational dynamic overset grids", Aircraft Engineering and Aerospace Technology, Vol. 87 No. 4, pp. 293-304. https://doi.org/10.1108/AEAT-07-2013-0130

Publisher

:

Emerald Group Publishing Limited

Copyright © 2015, Emerald Group Publishing Limited

Related articles