Weight minimization of fiber laminated composite beam for aircraft wing construction using exhaustive enumeration algorithm and numerical modeling
Aircraft Engineering and Aerospace Technology
ISSN: 0002-2667
Article publication date: 18 March 2021
Issue publication date: 23 March 2022
Abstract
Purpose
This paper aims to focus on calculating the number of layers of composite laminates required to take the applied load made up of graphite/epoxy (AS4/3501-6) which can be used in many industrial applications. Optimization for minimization of weight by variation in the mechanical properties is possible by using different combinations of fiber angle, number of plies and their stacking sequence.
Design/methodology/approach
Lots of research studies have been put forth by aerospace industry experts to improve the performance of aircraft wings with weight constraints. The orthotropic nature of the laminated composites and their ability to characterize as per various performance requirements of aerospace industry make them the most suitable material. This leads to necessity of implementing most appropriate optimization technique for selecting appropriate parameter sets and material configurations.
Findings
In this work, exhaustive enumeration algorithm has been applied for weight minimization of fiber laminated composite beam subjected to two different loading conditions by computing overall possible stacking sequences and material properties using classical laminate theory. This combinatorial type optimization technique enumerates all possible solutions with an assurance of getting global optimum solution. Stacking sequences are filtered through Tsai-Wu failure criteria.
Originality/value
Finally, through the outcome of this optimization framework, eight different combinations of stacking sequences and 24-ply symmetric layup have been obtained. Furthermore, this 24-ply layup weighing 0.468 kg has been validated using finite element solver for given boundary conditions. Interlaminar stresses at top and bottom of the optimized ply layup were validated with Autodesk’s Helius composites solver.
Keywords
Citation
Ghadge, R.R. and S., P. (2022), "Weight minimization of fiber laminated composite beam for aircraft wing construction using exhaustive enumeration algorithm and numerical modeling", Aircraft Engineering and Aerospace Technology, Vol. 94 No. 4, pp. 603-612. https://doi.org/10.1108/AEAT-12-2020-0305
Publisher
:Emerald Publishing Limited
Copyright © 2021, Emerald Publishing Limited