To read this content please select one of the options below:

Visible time window calculation based on map segmentation for task planning

Yue Wang (Institute of Remote Sensing Satellites, China Academy of Space Technology, Beijing, China)
Han Zhao (College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin, China)
Haiyue Yang (College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin, China)
Xiangshuai Song (College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin, China)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 22 September 2023

Issue publication date: 13 November 2023

54

Abstract

Purpose

The visible time window (VTW) calculation of satellites to ground targets is significant for Earth observation satellites' operation management and control. With the improvement of satellite maneuvering capability and the complexity of on-orbit observation tasks, the traditional VTW calculation methods can no longer meet the demands of satellite operation management and control due to a large amount of calculation and low efficiency. The purpose of this study is to propose a fast VTW calculation method based on map segmentation named map segmentation method (MSM), to improve the calculation efficiency, and further solve this problem.

Design/methodology/approach

The main feature of the MSM method is to segment the map and subsatellite trajectories and traverse the subsatellite points within a specific range around the target, significantly reducing the search space and the amount of computation and improving computational efficiency.

Findings

Numerical simulations for two satellite orbits are implemented to verify the feasibility of the proposed VTW calculation method, and the traditional traversal method (TM) is also performed for comparative analysis. The results show that the proposed method can obtain the same VTW, using less calculation time than the TM. The computational efficiency is significantly improved, especially for many tasks. The calculation time of observing 500 targets is saved by more than 70%, indicating a broad application prospect.

Originality/value

This paper proposes an original VTW calculation method based on map segmentation to improve the calculation efficiency. The simulation scenarios are designed to verify the accuracy and effectiveness of the proposed method, and the observation targets are randomly distributed on the map. For comparative analysis, the TM is also performed under the same simulation conditions.

Keywords

Acknowledgements

This work was supported in part by the Qian Xuesen Laboratory of Space Technology of the China Academy of Space Technology, and the Fundamental Research Foundation of the Central Universities(Nos. 3072022CFJ0202, 3072022CFJ0204).

Citation

Wang, Y., Zhao, H., Yang, H. and Song, X. (2023), "Visible time window calculation based on map segmentation for task planning", Aircraft Engineering and Aerospace Technology, Vol. 95 No. 10, pp. 1483-1492. https://doi.org/10.1108/AEAT-12-2022-0336

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles