Concurrent design of nanofluid for x-abilities using MADM approach

Abstract

Purpose

Multiple attribute decision making (MADM) is a conceptual agenda used for evaluation and selection of optimal nanofluid to assure best performance of heat exchanger. Most of the studies focus on nanofluids focus on individual ability at one time. Relatively, not even a single study is available for selection of nanofluid for heat exchanger using concurrent design and MADM approach. The purpose of this paper is to propose a concurrent design methodology using MADM approach to assist improved design of heat exchanger concurrently for all the x-abilities in an integrated manner.

Design/methodology/approach

A combined methodology of applying MADM approach using concurrent design for x-abilities is called CE-MADM approach. Implementation of nanofluid to improve thermal performance of heat exchanger entails thorough evaluation of nanofluids in various x-abilities (performance, maintenance, thermophysical properties and modelisation) to make exhaustive management decision. Sensitivity analysis is also proposed to study the behaviour of height of variation of density, heat capacity, thermal expansion and thermal conductivity with varying particle volume fraction and variation of relative closeness of available alternates from ideally best possible solution.

Findings

MADM approach considering various x-abilities concurrently provide an approach for relative ranking of available nanofluids for optimum performance. Fishbone diagrams of all x-abilities are constructed to identify all the attributes and converge large number of attributes into single numerical index that are concurrently responsible for the cause thus saving time for easy evaluation, comparison and ranking by decision makers. Sensitivity analysis to demonstration height of variation of pertinent attributes with varying particle volume fraction. A MATLAB programming is established to execute calculations involved in the procedure.

Originality/value

This paper comprises a predictable and effective mathematical approach to improve design of heat exchanger with nanofluid bearing in mind all the required x-abilities concurrently. This combined approach of CE-MADM is never applied before in the field of nanofluid to predict best possible results in feasible conditions considering all the x-abilities. Sensitivity analysis is also presented from the assumed mathematical equations of thermophysical properties.

Citation

Prakash, J. and Agrawal, V.P. (2016), "Concurrent design of nanofluid for x-abilities using MADM approach", Benchmarking: An International Journal, Vol. 23 No. 5, pp. 1286-1311. https://doi.org/10.1108/BIJ-07-2014-0062