A fast workpiece detection method based on multi-feature fused SSD

Abstract

Purpose

Workpiece sorting is a key link in industrial production lines. The vision-based workpiece sorting system is non-contact and widely applicable. The detection and recognition of workpieces are the key technologies of the workpiece sorting system. To introduce deep learning algorithms into workpiece detection and improve detection accuracy, this paper aims to propose a workpiece detection algorithm based on the single-shot multi-box detector (SSD).

Design/methodology/approach

Propose a multi-feature fused SSD network for fast workpiece detection. First, the multi-view CAD rendering images of the workpiece are used as deep learning data sets. Second, the visual geometry group network was trained for workpiece recognition to identify the category of the workpiece. Third, this study designs a multi-level feature fusion method to improve the detection accuracy of SSD (especially for small objects); specifically, a feature fusion module is added, which uses “element-wise sum” and “concatenation operation” to combine the information of shallow features and deep features.

Findings

Experimental results show that the actual workpiece detection accuracy of the method can reach 96% and the speed can reach 41 frames per second. Compared with the original SSD, the method improves the accuracy by 7% and improves the detection performance of small objects.

Originality/value

This paper innovatively introduces the SSD detection algorithm into workpiece detection in industrial scenarios and improves it. A feature fusion module has been added to combine the information of shallow features and deep features. The multi-feature fused SSD network proves the feasibility and practicality of introducing deep learning algorithms into workpiece sorting.

Citation

Shi, G., Zhang, Y. and Zeng, M. (2021), "A fast workpiece detection method based on multi-feature fused SSD", Engineering Computations, Vol. 38 No. 10, pp. 3836-3852. https://doi.org/10.1108/EC-10-2020-0589