Numerical study of obstacle geometry effect on the vortex shedding suppression and aerodynamic characteristics

Abstract

Purpose

Two-dimensional incompressible fluid flows around a rectangular shape placed over a larger rectangular shape at low Reynolds numbers (Re) have been numerically analyzed in the present work. The vortex shedding is investigated at different arrangements of the two shapes allowing the investigation of three possible configurations. The calculations are carried out for several values of Re ranging from 1 to 200. The effect of the obstacle geometry on the vortex shedding is analyzed for crawling, steady and unsteady regimes. The analysis of the flow evolution shows that with increasing Re beyond a certain critical value, the flow becomes unstable and undergoes a bifurcation. This paper aims to observe that the transition of the unsteady regime is performed by a Hopf bifurcation. The critical Re beyond which the flow becomes unsteady is determined for each configuration. A special attention is paid to compute the drag and lift forces acting on the rectangular shapes, which allowed determining; the best configuration in terms of both drag and lift. The unsteady periodic wake is characterized by the Strouhal number, which varies with the Re and the obstacle geometry. Hence, the values of vortex shedding frequencies are calculated in this work.

Design/methodology/approach

The dimensionless Navier–Stokes equations were numerically solved using the following numerical technique based on the finite volume method. The temporal discretization of the time derivative is performed by an Euler backward second-order implicit scheme. Non-linear terms are evaluated explicitly; while, viscous terms are treated implicitly. The strong velocity–pressure coupling present in the continuity and the momentum equations are handled by implementing the projection method.

Findings

The present paper aims to numerically study the effect of the obstacle geometry on the vortex shedding and on the drag and lift forces to analyze the flow structure around three configurations at crawling, steady and unsteady regimes.

Originality/value

A special attention is paid to compute the drag and lift forces acting on the rectangular shapes, which allowed determining; the best shapes configuration in terms of both drag and lift.

Citation

Fezai, S., Ben-Cheikh, N., Ben-Beya, B. and Lili, T. (2020), "Numerical study of obstacle geometry effect on the vortex shedding suppression and aerodynamic characteristics", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 30 No. 2, pp. 469-495. https://doi.org/10.1108/HFF-01-2016-0019