Simulation and analysis of micro-textured rough curved surface based on fractal characterization method

Abstract

Purpose

Micro-texture is processed on the surface to reduce the friction of the contact surface, and its application is more and more extensive. The purpose of this paper is to create a texture function model to study the influence of surface parameters on the accuracy of the simulated surface so that it can more accurately reflect the characteristics of the real micro-textured surface.

Design/methodology/approach

The microstructure function model of rough surfaces is established based on fractal geometry and polar coordinate theory. The offset angle θ is introduced into the fractal geometry function to make the surface asperity normal perpendicular to the tangent of the surface. The 2D and 3D contour surfaces of the surface groove texture are analyzed by MATLAB simulation. The effects of fractal parameters (D and G) and texture parameter h on the curvature of the surface micro-texture model were studied.

Findings

This paper more accurately characterizes the textured 3D curved surface, especially the surface curvature. The scale coefficient G significantly affects curvature, and the influence of fractal dimension D and texture parameters on curvature can be ignored.

Originality/value

The micro-texture model of the rough surface was successfully established, and the range of fractal parameters was determined. It provides a new method for the study of surface micro-texture tribology.

Peer review

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2023-0298/

Citation

Zhu, C. and Meng, X. (2024), "Simulation and analysis of micro-textured rough curved surface based on fractal characterization method", Industrial Lubrication and Tribology, Vol. 76 No. 3, pp. 309-316. https://doi.org/10.1108/ILT-09-2023-0298