Wrench perception in intermediary telepresence for remote manipulation

Abstract

Purpose

The purpose of this paper is to conduct a reliable remote manipulation with good contact perception of the remote site. The long-term experience of the authors’ repeatedly confirm that the highest relevance lies in monitoring the wrench acting at a structurally weak point of the work piece rather than monitoring the wrench experienced by the robot end-effector.

Design/methodology/approach

The approach followed here is to sense the wrench at the interface of the robot end-effector and the environment. Position and orientation data and environment model are used to arrive at the contact point in real time. The intent of remote contact procedure is understood based on the knowledge of motion trajectory. All the above information is used to develop a wrench transformation to obtain the force diagrams.

Findings

The haptic solutions greatly suffer from objectivity, and therefore may result in inconsistency in an operator’s role. Intermediary telepresence through the visual communication of the wrench at the remote site in the form of force diagram provides excellent consistency across the operators and operations. Observing six components of the wrench in separate graphs does not provide on-line error estimate. Force diagrams suggested in the paper are found to be highly effective in perceiving the wrench.

Practical implications

The contact mode operations like assembly, surgery, docking, etc. still suffer due to the lack of easily perceivable wrench visualization. This paper provides solution to such practical issues.

Originality/value

The concept is original, and has evolved steadily over a period of time.

Citation

Shirwalkar, V., Dwarakanath, T.A. and Bhutani, G. (2015), "Wrench perception in intermediary telepresence for remote manipulation", Industrial Robot, Vol. 42 No. 3, pp. 274-282. https://doi.org/10.1108/IR-01-2015-0003