Plate-fin heat exchanger network modeling, design and optimization – a novel and comprehensive algorithm

Abstract

Purpose

The purpose of this paper is to present a novel and applied method for optimum designing of plate-finned heat exchanger network. Considering the total annual cost as the objective function, a network of plate-finned heat exchanger is designed and optimized.

Design/methodology/approach

Accurate evaluation of plate-finned heat exchanger networks depends on different fin types with 10 different geometrical parameters of heat exchangers. In this study, fin numbers are considered as the main decision variables and geometrical parameters of fins are considered as the secondary decision variables. The algorithm applies heat transfer and pressure drop coefficients correction method and differential evolution (DE) algorithm to obtain the optimum results. In this paper, optimization and minimization of the total annual cost of heat exchanger network is considered as the objective function.

Findings

In this study, a novel and applied method for optimum designing of plate-finned heat exchanger network is presented. The comprehensive algorithm is applied into a case study and the results are obtained for both counter-flow and cross-flow plate-finned heat exchangers. The total annual cost and total area of the network with counter-flow heat exchangers were 12.5% and 23.27%, respectively, smaller than the corresponding values of the network with cross-flow heat exchanger.

Originality/value

In this paper, a reliable method is used to design, optimize parameters and the economic optimization of heat exchanger network. Taking into account the importance of plate-finned heat exchangers in industrial applications and the complexity in their geometry, the DE methodology is adopted to obtain an optimal geometric configuration. The total annual cost is chosen as the objective function. Applying this technique to a case study illustrates its capability to accurate design plate-finned heat exchangers to improve the objective function of the heat exchanger network from the economic viewpoint with the design of details.

Citation

Ramezanpour Jirandeh, R., Ghazi, M., Sotoodeh, A.F. and Nikian, M. (2021), "Plate-fin heat exchanger network modeling, design and optimization – a novel and comprehensive algorithm", Journal of Engineering, Design and Technology, Vol. 19 No. 5, pp. 1017-1043. https://doi.org/10.1108/JEDT-07-2020-0262