Parametric optimization in modified air abrasive jet machining
Multidiscipline Modeling in Materials and Structures
ISSN: 1573-6105
Article publication date: 18 April 2019
Issue publication date: 18 April 2019
Abstract
Purpose
The choice of best machining parameters is an extremely basic factor in handling of any machined parts. The purpose of this paper is to exhibit a multi-objective optimization technique; in view of weighted aggregate sum product assessment (WASPAS) technique toward upgrade the machining parameters in modified air abrasive jet machining (MAAJM) process: injecting pressure, stand-off distance (SOD), and abrasive mesh size measure with 100 rpm rotatable worktable on Nickel 233 alloy material. Three conflicting destinations, material removal rate (MRR), surface roughness (SR) and taper angles (Ta), respectively, are considered at the same time. The proposed procedure uses WASPAS, which is the examination of parametric optimization of the abrasive jet machining (AJM) process. The results was used any scopes of reactions in MAAJM process is the ideal setting of parameters are resolved through investigations represented. There is wide utilization of Nickel 233 in aviation enterprises; machining information on producing a hole utilizing MAAJM for the first time is given in this work, which will be helpful different industries.
Design/methodology/approach
This paper exhibits a multi-objective optimization technique; in view of WASPAS technique toward upgrade the machining parameters in MAAJM process: injecting pressure, SOD, and abrasive mesh size measure with 100 rpm rotatable worktable on Nickel 233 alloy material.
Findings
As an outcome of using the tool in any ranges of responses in the AJM process, the optimal setting of parameters is determined through experiments illustrated. The machining data of generating a hole using AJM are studied for the first time in this work, which will be useful for aerospace industries, where Nickel 233 is used broadly.
Originality/value
A new material in unconventional machining process and also a multi-objective optimization technique are adopted.
Keywords
Acknowledgements
Conflict of interest: the author(s) declare(s) that there is no conflict of interest regarding the publication of this paper.
Citation
Prasad, S.R., K. Ravindranath, K.R. and M.L.S. Devakumar, M.L.S.D. (2019), "Parametric optimization in modified air abrasive jet machining", Multidiscipline Modeling in Materials and Structures, Vol. 15 No. 3, pp. 617-629. https://doi.org/10.1108/MMMS-02-2018-0036
Publisher
:Emerald Publishing Limited
Copyright © 2019, Emerald Publishing Limited