Squeeze film derivation of the porous curved annular plates with variable magnetic field, Rosensweig’s viscosity and slip velocity in the Shliomis model

Abstract

Purpose

The present article aims to investigate the squeeze effects on hematite suspension-based curved annular plates with Rosensweig’s viscosity and Kozeny–Carman’s porous structure under the variable strong magnetic field and slip in the Shliomis model. The variable magnetic field is utilised to retain all magnetic elements within the model. The aforementioned mechanism would have the benefit of generating a maximal field at the system’s required active contact zone.

Design/methodology/approach

The Kozeny–Carman globular sphere model is used for porous facing. Rosensweig’s extension of Einstein’s viscosity is taken into consideration to enhance the fluid’s viscosity, and Beavers and Joseph’s slip boundary conditions are employed to assess the slip effect.

Findings

The pressure and lifting force under squeezing are computed through modification of the Reynolds equation with the addition of Kozeny–Carman’s model-based porosity, Rosensweig’s viscosity, slip and varying magnetic field. The obtained results for the lifting force are very encouraging and have been compared with Einstein’s viscosity-based model.

Originality/value

Researchers so far have carried out problems on lubrication of various sliders considering Einstein’s viscosity only, whereas in our problem, Rosensweig’s viscosity has been taken along with Kozeny–Carman’s porous structure model.

Citation

Devender, Ram, P. and Sharma, K. (2024), "Squeeze film derivation of the porous curved annular plates with variable magnetic field, Rosensweig’s viscosity and slip velocity in the Shliomis model", Multidiscipline Modeling in Materials and Structures, Vol. 20 No. 2, pp. 384-400. https://doi.org/10.1108/MMMS-09-2023-0299