From suspension toward emulsion and mini-emulsion polymerisation to control particle size, particle size distribution, and sphereness of printing toner

Abstract

Purpose

Printing toners are polymer composites accountable for transmission of digital images onto target substrates. Bearing in mind the ever increasing demand for high quality digital printing, modification and/or integration of existing techniques for manufacturing toners with favourable morphological and colour characteristics appears of vital importance. The present study aims to uncover the significance of in-situ polymerisation method, i.e. suspension, emulsion and mini-emulsion to control the microstructure of toner particles (particle size, particle size distribution and sphereness) while keeping the energy required for polymerisation along with reaction conversion at a reasonable level.

Design/methodology/approach

Assessment of particle size, particle size distribution and reaction conversion visualised the potential of suspension, emulsion and mini-emulsion polymerisation techniques to control microstructure, and colour characteristics of synthesized toners as well.

Findings

The results provided support for the fact that either the emulsion or mini-emulsion polymerisation routes will result in toners having an acceptable particle size and particle size distribution in the presence of a redox precursor. The higher monomer conversion at low temperature, as compared to the suspension polymerisation, was noticeable.

Practical implications

Analysing the glass transition temperature and colour characteristics of the resulting toners elucidated the superiority of mini-emulsion with respect to the other two cases which ranks this method on account of application.

Originality/value

For the first time, mini-emulsion route was put into practice and toners with acceptable colour and microstructure features were synthesised. In spite of lower polymerisation temperature and higher conversion of mini-emulsion compared to suspension and emulsion polymerisation techniques, further investigations are required to fine-tuning the properties of toners produced through this method.

Citation

Andami, F., Ataeefard, M., Najafi, F. and Saeb, M.R. (2016), "From suspension toward emulsion and mini-emulsion polymerisation to control particle size, particle size distribution, and sphereness of printing toner", Pigment & Resin Technology, Vol. 45 No. 5, pp. 363-370. https://doi.org/10.1108/PRT-07-2015-0066