Evaluation of removal of acid dyes using PAM-FeSO₄ hybrid polymer as flocculant

Abstract

Purpose

In this study, the removal of a series of acid dyes by hybrid polymer adsorbent was investigated. Textile industry wastewater is mainly consisted of suspended solid particles and organic compounds with complex and nondecomposable structures. Treatment of such wastewaters has received much attention by researchers because of high water consumption and the presence of various chemical compounds, especially dyes. The use of polymers has recently attracted much attention for the treatment of textile wastewaters. According to the literature, hybrid polymers are highly capable of adsorbing dyes. In this research work, polyacrylamide/iron sulfate (PAM-FeSO₄) hybrid polymer was successfully synthesized through solution polymerization of acrylamide with ammonium persulfate and sodium thiosulfate and gradual addition of iron sulfate. The hybrid polymeric adsorbent was then used for removing acidic dyes with different chemical structures.

Design/methodology/approach

The effects of various experimental conditions and parameters, such as initial concentrations of dye and adsorbent, on the adsorption capacity of the adsorbent were investigated. The dye concentration was measured by an UV–vis spectrophotometer. The adsorption equilibrium was studied by plotting adsorption isotherms. The experimental data was fitted to Langmuir and Freundlich isotherms.

Findings

The adsorption experiments indicated that the PAM-FeSO₄ hybrid polymer has a high adsorption capacity (117.64 mg g⁻¹ for the Orange ІІ and 80.64 mg g⁻¹ for the Sunset Yellow [SY]) when 80 mg of adsorbent was immersed in the dye solution (1 g L⁻¹) with a pH of 11 at 25°C. The analysis of the equilibrium isotherms using the Langmuir and Freundlich isotherms indicated that the Langmuir model fit well to the experimental data.

Originality/value

To the best of the authors’ knowledge, this study is original. The removal of acid dyes such as Sunset Yellow and Methyl Orange using PAM-FeSO₄ hybrid polymer as flocculant was done for the first time.

Citation

Shaki, H. (2023), "Evaluation of removal of acid dyes using PAM-FeSO₄ hybrid polymer as flocculant", Pigment & Resin Technology, Vol. 52 No. 3, pp. 302-309. https://doi.org/10.1108/PRT-07-2022-0085