Guiding the user to continuous‐path control: Part II
Lothar Rossol
(Trellis Software & Controls, USA President R&D of Trellis Software & Controls Inc, an international supplier of robotic application and system software with headquarters at Rochester Commerce Commons, 2619 Product Drive, Suite 106, Rochester Hills, Michigan 48309, USA (Tel: (313) 853 0700, Fax: (313) 853 0707).)
Kenneth A. Stoddard
(Trellis Software & Controls, USA Vice‐President R&D of Trellis Software & Controls Inc, an international supplier of robotic application and system software with headquarters at Rochester Commerce Commons, 2619 Product Drive, Suite 106, Rochester Hills, Michigan 48309, USA (Tel: (313) 853 0700, Fax: (313) 853 0707).)
31
Abstract
In the first part of this article in the March issue only robot motion, with the robot stopping at each programmed position, was discussed. In the second part, the problem of continuous movement through, or near, a taught position is considered.
Citation
Rossol, L. and Stoddard, K.A. (1990), "Guiding the user to continuous‐path control: Part II", Industrial Robot, Vol. 17 No. 2, pp. 75-78. https://doi.org/10.1108/eb005084
Publisher
:MCB UP Ltd
Copyright © 1990, MCB UP Limited