Blistering in water‐immersed coatings under the influence of a temperature gradient

Abstract

Introduction Blistering of coatings under the influence of a temperature gradient was first observed some ten years ago. The process is induced when a heat flux passes through the coating to a colder wall. Elimination of the temperature gradient, e.g. through the use of pigments with a high degree of heat conductance, has been proposed as a remedy.

Citation

de Vries, I.T. (1970), "Blistering in water‐immersed coatings under the influence of a temperature gradient", Anti-Corrosion Methods and Materials, Vol. 17 No. 7, pp. 11-19. https://doi.org/10.1108/eb006786