To read this content please select one of the options below:

CORROSION INHIBITORS FOR ZINC

M.N. Desai (University School of Sciences, Ahmedabad, India)
S.S. Rana (University School of Sciences, Ahmedabad, India)
M.H. Gandhi (University School of Sciences, Ahmedabad, India)

Anti-Corrosion Methods and Materials

ISSN: 0003-5599

Article publication date: 1 December 1973

151

Abstract

Zinc is one of the most important nonferrous metals and finds extensive use in metallic coatings. It is resistant to atmospheric attack and corrodes rapidly only in highly polluted air. It is resistant to most fresh waters but its resistance to sea water and to very soft water is lower. In many aerated hot waters, reversal of polarity between zinc and iron occurs at temperatures of 60°C or above. The corrosion products of zinc are readily soluble both in alkalis and acids and protect the metal surface only in neutral media. In neutral solutions, zinc is corroded mainly by oxygen depolarisation. The dissolution rate of zinc in acids is greatly affected by the over‐potential of hydrogen evolution at cathodic inclusions.

Citation

Desai, M.N., Rana, S.S. and Gandhi, M.H. (1973), "CORROSION INHIBITORS FOR ZINC", Anti-Corrosion Methods and Materials, Vol. 20 No. 12, pp. 3-6. https://doi.org/10.1108/eb006939

Publisher

:

MCB UP Ltd

Copyright © 1973, MCB UP Limited

Related articles