New multi-purpose multi-metal coolant

Citation

(2002), "New multi-purpose multi-metal coolant", Industrial Lubrication and Tribology, Vol. 54 No. 1. https://doi.org/10.1108/ilt.2002.01854aad.010

New multi-purpose multi-metal coolant

Keyword: Master Chemical Europe

The latest TRIM high oil semi-synthetic emulsion concentrate from Master Chemical Europe has been formulated to run effectively for long periods without the need for costly additives. Compatible with all ferrous and non-ferrous materials, SC9030 has a very wide application range including high speed turning and grinding.

This general purpose, multi-metal coolant is extremely stable and hard water resistant. it therefore promises a long sump life (Plate 8). The fine particle size of SC9030 reduces carry-off and facilitates its delivery to the point of cut; any residue is easily removed with either water, working solution or aqueous cleaners. By leaving a very light oil on slideways, chucks, tool holders and fixtures, the SC9030 also effectively prevents the accumulation of residue.

TRIM SC9030 contains a non-chlorinated, non-sulphurised extreme pressure additive to control edge build-up. In applications where friction reduction and prevention of built-up edge are critical, a higher concentration of emulsion to water is recommended; lower concentrations meet the needs of high speed operations where heat removal is the key issue.

TRIM~ SC9030 is available in 20 litre plastic pails, 204 litre steel drums or 1000 litre IBC containers.

Plate 8 The latest TRIM high oil semi-synthetic emulsion concentrate from Master Chemical Europe is the SC9030, compatible with all ferrous and non-ferrous materials