Digital instrumentation recorders enable high-speed wideband multi-channel data capture

Sensor Review

ISSN: 0260-2288

Article publication date: 30 January 2007

48

Citation

(2007), "Digital instrumentation recorders enable high-speed wideband multi-channel data capture", Sensor Review, Vol. 27 No. 1. https://doi.org/10.1108/sr.2007.08727aad.008

Publisher

:

Emerald Group Publishing Limited

Copyright © 2007, Emerald Group Publishing Limited


Digital instrumentation recorders enable high-speed wideband multi-channel data capture

Digital instrumentation recorders enable high-speed wideband multi-channel data capture

Sony Manufacturing Systems Europe has extended its successful range of high- speed digital data recorders with the announcement of the SIR3000 Series that provide industry leading storage capacity and data transfer rates. The data recorders directly record precious experimental data that must be captured accurately in one take. The units are portable and deliver a high degree of mobility, perfect for collecting data at prototyping or development sites. Sony's SIR3000 Series recorders are ideally suited for research and engineering in aerospace, railway, military and engine/turbine industries.

Often tests cannot be reproduced or are prohibitively expensive to reproduce and the customer needs to be 100 per cent sure to have all relevant measurement data after the test. In addition, some tests require a huge amount of data channels and/or high bandwidth and/or need to be run over a long time, simply cannot be handled by a standard computer front- end. The Sony SIR3000 Series recorders deliver a high recording capacity of 200GB, high data transfer rate of 12MB/s, are as easy to operate as a tape recorder and provide a Raid one HD array.

The SIR3000 series offer sampling frequencies up to 192kHz and a dynamic range of 90dB or more. They offer four times the recording rate and eight times more capacity than Sony's existing SIR1000 models by providing high capacity 200GB hard disc or AIT3 tape at a transfer rate of 12MB/s. The standard 32 channels can be easily increased to 128 by adding further measuring units.

The SIR3000 Series recorders provide a variety of interfaces for real time recording and processing, with an option of input modes including support for voltage and ICP® – and TEDSw- sensors. Typical data captures include the recording of sound, vibration, distortion, biological signals and temperature.

The dual hard disk drives are front mounted in the recorder for easy access, and are hot swappable, protecting valuable data in a raid one array which consistently captures data without the worry and expense of a drive or media failure. For sensitive data, users need only secure the hard disk drives, and not the entire recorder.

The portable units measure only 449(W) × 88(H) × 305(D) mm and weigh 8kg.

Sony Manufacturing Systems Europe also offers software that easily transfers the recorded data to a PC.

For further information contact: Wolfgang Ziehers, Sony Manufacturing Systems Europe, Tel: +49 (0) 711 58 58 777. Fax: +49 (0) 711 58 07 15. E-mail: smse-di@eu.sony.com

Related articles