Aircraft Engineering and Aerospace Technology: Volume 34 Issue 10

Strapline:

An International Journal
Subjects:

Table of contents

Farnborough Diary

THE last of the annual Farnborough Air Shows (see p. 302) went out in a blaze of glory—fulfilling right royally its early promise of being an occasion for the connoisseur. Seven…

Constant Speed Drives: Design and Operational Problems Associated with the Major Types of C.S.D. for Aircraft Accessories

J.P. Mooney

MODERN turbojet engines have a shaft speed range of approximately 2 to 1 (from ground idle to take‐off) and it is necessary, therefore, to have some form of…

British Research Aircraft: Brief Details of Two Single‐seat Research Aircraft Produced by the British Aircraft Corporation

SINCE the Second World War, Britain has built and flown a large number of research aircraft which have proved (or disproved) the operational validity of particular design…

Iridium Electrode Spark Plugs: Brief Details of the K.L.G. Plugs for Piston Aero Engines Which Have Iridium Electrodes instead of the More Conventional Platinum Alloy Electrodes

SOME new types of K.L.G. spark plugs for piston aero engines have recently gained Air Registration Board approval and have been undergoing intensive field trials with several…

Simplified Helicopter Ground Resonance Stability Boundaries: Development of a New Method of Determining Stability Boundaries

H.L Price

A method is developed or drawing ground resonance stability boundaries in the (?1, ?) plane for arbitrary values of the parameters ??, A1 and Aa. The current values of ?1 and …

Producing Centrifugal Castings for Gas Turbine Compressor Casings: Details of the Firth‐Vickers' Programme, Sponsored by the Ministry of Aviation, Which Has Resulted in Substantial Savings of Time and Money Following the Adoption of the ‘Casting to Shape’ Techniques

TODAY, aircraft gas turbine engines are being developed to give over 28,000 lb. thrust and, while low‐pressure compressor casings can be made from a magnesium‐alloy casting, the…

The Twenty‐Third S.B.A.C. Show: A Review of the Exhibits at the Society of British Aircraft Constructors' Flying Display and Exhibition, Farnborough, 1962

AS anticipated, the 1962 Society of British Aircraft Constructors' Flying Display and Exhibition at Farnborough was the biggest and most interesting for many years. In all, seven…

The Library Shelf

This book contains the proceedings of the third U.S.A.F. Office of Scientific Research Astronautics symposium and, consequently, suffers from not being a coherent whole but a…

Research Reports and Memoranda

Under this heading are published regularly abstracts of all Reports and Memoranda of the Aeronautical Research Council, Technical Reports and Translations of the United States…

Auxiliary Equipment

Research and Engineering Controls Ltd. have recently announced an aircraft pitot pressure head of high de‐icing performance suitable for use on subsonic or supersonic aircraft at…

Aviation Electronics

A Decca type 424 airfield control radar has been purchased by the County Borough of Swansea, and installation of the equipment at Swansea Airport has recently been completed.

Tools for the Workshop

To their range of high‐speed shaping machines, B. Elliott (Machinery) Ltd., London, N.W.10, have recently added a new 10‐in. stroke model.

British Patent Abridgments

A silenced jet propulsion installation comprises one or more rows of jet nozzles arranged at the outlet end of a jet pipe. The engine is arranged on the aircraft with the rows of…

Cover of Aircraft Engineering and Aerospace Technology

ISSN:

0002-2667

Online date, start – end:

1929

Copyright Holder:

Emerald Publishing Limited

Open Access:

hybrid

Editor:

  • Prof Phil Webb