Industrial Lubrication and Tribology: Volume 22 Issue 2
Covers all automotive and industrial applications of lubricants
Table of contents
SEALING ROLLING BEARINGS
Norman E. HardySELECTING the correct bearing for any particular application involves more than the determination of the correct type and size. It is true that the calculation of the nominal…
OIL SEAL RESEARCH
E.T. Jagger, D. WallaceThis article surveys the present state of knowledge relating to the question of what goes on at the point of contact between the seal and the shaft in the case of the garter…
NOISE TESTING AT HOFFMANN BEARINGS
METHODS of assessing the level at which vibration becomes unacceptable in any bearing are generally based on comparison. Hoffmann have now initiated a programme to substitute…
Oil Seals and Oil Sealing
R.J.G. WalkerTO THE SEAL manufacturer, the whole question of sealing is a complex and profound subject, but it is his aim to make it as simple as possible to the people who will actually…
Radial Face‐Type Mechanical Shaft Seals: Developments by Crane Packing Ltd., in Fluid Sealing Techniques
THE SEALING device which is used to prevent leakage around the rotating drive shaft of a pump, compressor or similar equipment—for long regarded as an ancillary device, merely…
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz