Industrial Lubrication and Tribology: Volume 60 Issue 3

Cutting fluid efficiency in end milling of AISI 304 stainless steel

K.A. Abou‐El‐Hossein

The purpose of this paper is to investigate the efficiency of cutting fluids when end milling AISI 304 stainless steels.

Friction coefficient and surface roughness of TiN‐coated HSS deposited using cathodic arc evaporation PVD technique

Mubarak Ali, Esah Hamzah, Mohammad Radzi Toff

The purpose of this paper is to examine the effect of substrate temperature on friction coefficient and surface roughness of titanium nitride (TiN) coatings deposited on…

Performance evaluation and analysis of lubricating oil using parameter profile approach

B.C. Sharma, O.P. Gandhi

The purpose of this paper is to evaluate and analyze lube oil performance. The plant experience shows that the oil, even after completion of a number of hours of recommended…

Experimental study of the effect of additive on the tribological properties journal bearing under running‐in and start‐up or shut‐down stages

Ertuğrul Durak, Hakan Adatepe, Aydin Biyiklioğlu

The purpose of this paper is to study the effects of additive on the tribological properties such as friction coefficient and wear loss in the journal bearings during start‐up (or…

Tribological properties of Cyanex 301‐modified MoS2 nano‐sized hollow spheres in liquid paraffin

Xiaodong Zhou, Huaqiang Shi, Xun Fu, Danmei Wu, Zhengshui Hu

The purpose of this paper is to investigate the tribological properties of MoS₂ nano‐sized hollow spheres in liquid paraffin (LP) and the corresponding action mechanism. Morever…

Digraph‐based reliability assessment of a tribo‐pair

B. Sharma, O.P. Gandhi

Most of the mechanical systems consist of common tribo components such as gear, bearing, seal, pump, etc. During operation, the failure of such a component may lead to failure of…

Forthcoming events

University develops new performance coating

Editorial

John Taylor