Industrial Lubrication and Tribology: Volume 63 Issue 5

Application of a hybrid method to the bifurcation analysis of a relative short gas journal bearing system with herringbone grooves

Cheng‐Chi Wang

This paper employs a hybrid numerical method combining the differential transformation method (DTM) and the finite difference method (FDM) to study the bifurcation and nonlinear…

Effect of duration of rubbing and normal load on friction coefficient for polymer and composite materials

Dewan Muhammad Nuruzzaman, Mohammad Asaduzzaman Chowdhury, Mohammad Lutfar Rahaman

The present paper seeks to report the effect of duration of rubbing on friction coefficient for different polymer and composite materials. Variations of friction coefficient and…

Prediction of contact surface temperature between rough sliding bodies – numerical analysis and experiments

Sudipto Ray, S.K. Roy Chowdhury

The paper's aim is to predict numerically the contact temperatures between two rough sliding bodies and to compare with the experimental results.

The wear behaviour of duplex treated AISI 5140 steel

Yasar Totik, Akgun Alsaran, Ayhan Celik, Ihsan Efeoglu

This work aims to investigate the wear behavior of manganese phosphate coating on plasma nitrided AISI 5140 steel.

The tribological behaviours of aluminium‐based materials under dry sliding

Erol Feyzullahoğlu, Nehir Şakiroğlu

The purpose of this study is to develop new Al‐based bearing alloys which have better properties than classic commercial bearing materials and to analyze tribologic properties of…

Investigation of properties of ion‐nitrided AISI 304 austenitic‐stainless steel

Mumin Sahin, Ceyhun Sevil

The aim is to provide detailed mechanical and metallurgical examinations of ion‐nitrided austenitic‐stainless steels.

Laser bending of steel sheets: corrosion testing of bended sections

Bekir Sami Yilbas, Mazen Khaled, Sohail Akhtar, Cihan Karatas

Laser bending is a good candidate to replace the flame bending process. The electrochemical response of laser bending region changes due to the microstructural modifications and…

Influence of non‐Newtonian behavior of lubricant on performance of hole‐entry hybrid journal bearings employing constant flow valve restrictors

H.C. Garg

This paper aims to describe the theoretical study concerning the effect of non‐linear behavior of the lubricant on the performance of symmetric constant flow valve compensated…

Friction and wear behaviors of Al‐SiC‐B4C composites produced by pressure infiltration method

U. Soy, A. Demir, F. Findik

The main goal of the present study is to investigate the friction and wear behaviors of aluminum matrix composites with an A360 matrix reinforced with SiC, B₄C and SiC/B₄C…

Forthcoming events