Industrial Lubrication and Tribology: Volume 64 Issue 2

The effect of oxygen on the tribological behavior of CrNiMo steel

San‐ming Du, Yong‐zhen Zhang, Yue Chen, Wei‐min Liu

The purpose of this paper is to study the friction and wear properties of CrNiMo steel pin against brass disk in different oxygen fractions. CrNiMo steel is currently widely used…

The influence of honing process parameters on surface quality, productivity, cutting angle and coefficients of friction

Damir S. Vrac, Leposava P. Sidjanin, Pavel P. Kovac, Sebastian S. Balos

The purpose of this paper is to explore the influence of tool kinematics parameters on surface roughness, productivity and cutting angle for grey cast iron cylinder liners…

The effect of hexagonal boron nitride additive on the effectiveness of grease‐based lubrication of a steel surface

Zenon Pawlak, Tadeusz Kałdoński, Michal Lisewski, Wieslaw Urbaniak, Adekunle Oloyede

The purpose of this paper is to study the sliding and the vibrating fretting tests mechanism of h‐BN micro‐particles when used as a lubricating grease‐2 additive.

Effects of using smart fluid in lubrication on skirt‐liner friction

S.H. Mahdavi, S.H. Mansouri, A. Kimiaeifar

The purpose of this paper is to present, for the first time, a mathematical model for a piston skirt in mixed lubrication with respect to applying a smart fluid in lubrication. In…

Tribological properties of polytetrafluoroethylene as additive in titanium complex grease

Chen Jiguo

The purpose of this paper is to study, analyze and present the lubricating mechanism and tribological properties of two types of oil‐based titanium complex grease containing…

Identification of lubricant contamination by biodiesel using vibration analysis and neural network

Aparecido Carlos Gonçalves, Linilson Rodrigues Padovese

The purpose of this paper is to provide information on lubricant contamination by biodiesel using vibration and neural network.

Investigation of the tribological properties of Cu‐based porous bearings

Recai Fatih Tunay, Cahit Kurbanoğlu

The purpose of this paper is to evaluate, by experimental investigation, the wear and friction performances of porous bearings under different operating conditions.

Forthcoming events