Industrial Lubrication and Tribology: Volume 68 Issue 4

Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil

Muhammad Ilman Hakimi Chua Abdullah, Mohd Fadzli Bin Abdollah, Noreffendy Tamaldin, Hilmi Amiruddin, Nur Rashid Mat Nuri

This paper aims to investigate the effect of hexagonal boron nitride (hBN) nanoparticles on extreme pressure (EP) properties when used as an additive in lubricating oil.

Investigation of flank wear in MQL milling of ferritic stainless steel by using nano graphene reinforced vegetable cutting fluid

Alper Uysal

In milling of stainless steel materials, various cutting tool failures such as flank wear, crater wear, cracks, chipping, etc. can be observed because of their work hardening…

Sliding wear behavior of magnetron sputtered chromium carbide thin films

Nasser Eddine Beliardouh, Corinne Nouveau, Hakan Kaleli

The purpose of this technical paper is to investigate the friction and wear behavior of inexpensive and durable cutting tools, developed for wood machining using duplex treatment.

Control on wear of journal bearing operating in mixed lubrication regime using grooving arrangements

Lijesh K.P., Muzakkir S.M., Harish Hirani, Gananath Doulat Thakre

The journal bearings subjected to heavy load and slow speed operate in mixed lubrication regime causing contact between the interacting surfaces and resulting in wear. Complexity…

Investigation of fretting wear in journal bearings

Yasar Sevik, Ertugrul Durak

Fretting wear takes place when two contacting solid surfaces are subjected to relatively small amplitude oscillatory motion in the order of a few microns. The purpose of this…

Investigation of thermochemical boriding effect on wear behavior of a GGG 50 quality as-cast ductile iron

Harun Mindivan

This study aims to investigate the microstructure and the abrasive wear features of the untreated and pack borided GGG 50 quality ductile iron under various working temperatures.

Comparison of tribological performances of sulfur based and boron succuminide containing antiwear additive with ZDDP by engine bench tests

Doğuş Özkan, M. Barış Yağci, Özgür Birer, Hakan Kaleli

This study aims to evaluate and compare by 100 hours engine bench tests the tribological performances of two types of lubrication oils, which were sulfur-based, boron…

Optimization of the oil drain interval of non-phosphorus and non-ash engine oil

Levent Yüksek

Zinc dialkyldithiophosphate (ZDDP) is the most common anti-wear and anti-oxidant additive. ZDDP is the primary origin of zinc, sulfur and phosphorus, which are well-known…

Effect of argon plasma surface modification on tribological behavior of biopolymers

Binnur Sagbas

The aim of this study is to determine the effect of argon plasma surface modification on tribological properties of conventional ultra-high molecular weight polyethylene (UHMWPE…

Raman spectroscopy characterization of hypo-eutectic CoCrWC alloy tribolayers

Amir Motallebzadeh, Erdem Atar, Huseyin Cimenoglu

This paper aims to study microstructure and high temperature tribological performance of hypo-eutectic CoCrWC hardfacing alloy (Stellite 12) deposited on steel substrate by…