Industrial Lubrication and Tribology: Volume 69 Issue 2
Covers all automotive and industrial applications of lubricants
Table of contents
Air barrier effect in out of mesh jet lubrication of ultra-high speed spur gears
Wentao Niu, Yanzhong Wang, Yanyan Chen, Guanhua SongThis paper aims to reveal the mechanism of air barrier effect in jet lubrication and to figure out the influence of gear parameters and conditions on air barrier, thus providing…
Preparation and tribological properties of PI oil-bearing material with controllable pore size
Zhining Jia, Yanhong Yan, Weizheng WangThe content of pore-foaming agent directly affects pore characteristics and oil-absorption properties of polyimide (PI) porous materials, which further influence the tribological…
Design and analysis of a self-lubricating nuclear joint bearing above 320°C
Jun Cao, Zhongwei Yin, Yuqing Cui, Hulin Li, Gengyuan Gao, Xinbo WangThe purpose of this study was to solve the problem of most woven-fabric self-lubricating bearings that find it difficult to function at temperatures above 320°C, by designing a…
On the performance of foil thrust bearing with misaligned bearing runner
Abdelrasoul M. GadCompliant foil thrust bearings are promising bearings for high-speed oil-free turbomachinery. However, most previous experimental and numerical approaches to investigate the…
Experimental studies on magnetorheological brake containing plane, holed and slotted discs
Chiranjit Sarkar, Harish HiraniThis study aims to design an ideal magnetorheological (MR) brake that exerts negligible frictional torque in the off-state condition and controllable frictional torque in the…
Analysis of dynamic characteristics and stability prediction of gas bearings
Chenhui Jia, Huanji Pang, Wensuo Ma, Ming QiuThe prediction model to estimate the stability of a rotor-bearing system is established, which can predict the stability of gas bearings by applying Routh–Hurwitz stability…
Tribological characteristics of piston rings in a single-piston hydraulic free-piston engine
Zhaoju Qin, Chenheng Yuan, Yanpeng Yuan, Yuanyuan HuangA free-piston engine (FPE) is an unconventional engine that abandons the crank system. This paper aims to focus on a numerical simulation for the lubricating characteristics of…
Tribological properties of Fe-Cr-B alloy for sliding boot in coal mining machine under dry sliding condition
Hongbin Xuan, Gongjun CuiTo improve the wear resistance of the sliding boot, the wear-resistant Fe-21 Wt.% Cr-5 Wt.% B alloy is prepared, and the wear mechanism is studied under dry sliding condition.
High-stress abrasive wear behavior of Al–Mg–Si hybrid composites using regression analysis
N.C. Kaushik, R.N. RaoThe purpose of the present study is to analyze the wear behavior of developed aluminum hybrid composites under high-stress conditions through developed power law and quadratic…
The effect of serpentine additive on energy-saving and auto-reconditioning surface layer formation
Xiao Wang, Junwei Wu, Xicheng Wei, Rende Liu, Qi CaoThis paper aims to investigate the energy-saving effect and mechanism of serpentine as lubricant additive in the simulated condition.
Investigation of the precision loss for ball screw raceway based on the modified Archard theory
Chang-Guang Zhou, Yi Ou, Hu-Tian Feng, Zeng-Tao ChenThis paper aims to examine the precision loss of ball screw raceway under different operating conditions and geometry parameters.
Technique developed to study camshaft and tappet wear on real production engine
Waseem Arshad, Muhammad Adnan Hanif, Muhammad Usman Bhutta, Riaz Ahmad Mufti, Samiur Rahman Shah, Muhammad Usman Abdullah, Muhammad Huzaifa NajeebThis paper aims to present a technique that has been developed to study the wear in the camshaft and tappet. The engine manufacturers use the most suitable materials, lubrication…
Tribology of Ge thin films on stainless steel
Lubomir Krabac, Vladimir Pejaković, Vladislav Drinek, Nicole Dörr, Ewald BadischThe purpose of this paper is to study the friction and wear behavior of germanium (Ge) thin films deposited by low-pressure chemical vapor deposition method on a chromium…
Superlow friction of high mileage used oil with CuDTC in presence of MoDTC
Qunfeng ZengThe purpose of this paper is to improve the antifriction and antiabrasive behavior of the used oil through the addition of a lubricant.
Friction and wear behavior of hydrogenated diamond-like carbon coating against titanium alloys under large normal load and variable velocity
Jun Liu, Zhinan Zhang, Zhe Ji, Youbai XieThis paper aims to investigate the effects of reciprocating frequency, large normal load on friction and wear behavior of hydrogenated diamond-like carbon (H-DLC) coating against…
Effect of unleaded gasoline blended with biofuels on gasoline injector wear and exhaust emissions
De-Xing PengTo prolong engine life and reduce exhaust pollution caused by gasoline engines, the aim of this paper was to compare the lubrication properties of biofuel (ethanol) blends and…
Demarcation boundary between region dominated by elastohydrodynamic lubrication and that by the surface force action for different elliptical ratios
Mohamed Abd Al-SamiehThis paper aims to investigate the effect of changing speed of the entraining motion on the formation of ultra-thin lubricating films under different elliptical ratios. The…
Experimental study on thermal effect of tilted roller pairs in rolling/sliding contacts
Wenjing Zhang, Wei Chen, Zhe LiuThe aim of this study is to understand thermal effects and surface topography of roller bearings with misaligned load under combination of multifactors by an experimental method.
Corrosion-wear behavior of 316L stainless steel under different applied potentials
Gaofeng Han, Pengfei Jiang, Jianzhang Wang, Fengyuan YanThis report aims to study the influence of applied potentials on the corrosion-wear behavior of 316L stainless steel (SS) in artificial seawater.
Sliding wear behaviour of Al-Si alloy–fly ash composites produced by powder metallurgy technique
H. Siddhi Jailani, A. Rajadurai, B. Mohan, T. SornakumarMetal matrix composites (MMCs) are commonly used in many aerospace and industrial applications. MMCs possess significantly improved properties including high specific strength…
Study on the friction characteristics of 304 steel with composite surface modification
Wengang Chen, Xueyuan Liu, Lili ZhengThis paper aims to clarify the friction properties of 304 steel surface modification. The surface modification includes laser texturing processing and nitriding treatment on 304…
Optimization of friction properties of kenaf polymer composite as an alternative friction material
Ashafie Mustafa, Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Fairuz Fazillah Shuhimi, Noryani MuhammadThe aim of this study is to determine the optimal parameters for friction coefficient of kenaf/epoxy (KE) composite as an alternative friction material.
The study of friction layer and tribological property of PI–matrix composites
Xiulin Xu, Xing Lu, Zuoxiang Qin, Dalong YangThis paper aims to study the friction layer and tribological property of polyimide (PI)–matrix composites under different friction speeds.
Tribological performance of three surface-modified piston rings matched with chromium-plated cylinder liner
Feng Zhu, Jiujun Xu, Xiaoguang Han, Yan Shen, Mei JinThe paper aims to investigate the friction and wear properties of three surface-modified piston rings matched with a chromium-plated cylinder liner.
Study on the frictional performance of slide and plateau honed cylinder liners during running-in
Yang Hu, Xianghui Meng, Youbai Xie, Jiazheng FanDuring running-in, the change in the honed cylinder liner surface alters the performance and efficiency of the piston ring-pack system. The present paper, thus, aims to…
Wear and corrosion characteristics of copper-based composite coatings
Cagdas Calli, Onur Tazegul, Eyup Sabri KayaliThe purpose of this paper is to investigate the effects of reinforcing particles (B4C, TiB2 and TiC) on the physical, corrosion and wear behaviour of copper matrix composite…
Dynamic meshing incentive analysis for wind turbine planetary gear system
Yuxiang Chen, Mutellip Ahmat, Zhong-tang HuoIrregular windy loads are loaded for a wind turbine. This paper aims to determine the form of gear failure and the working life of the gear system by assessing the dynamic…
Extending Hertz equation for an elastic contact between a layered cylindrical hollow roller and flat plate through an experimental technique
Mitul Thakorbhai Solanki, Dipak VakhariaThe purpose of this paper is to extend the Hertz equation for the contact interaction between a layered cylindrical hollow roller and a flat plate through an experimental…
Comparative analysis of tribological behavior of plasma- and high-velocity oxygen fuel-sprayed WC-10Co-4Cr coatings
Shiyu Cui, Qiang Miao, Wenping Liang, Yi Xu, Baiqiang LiThe purpose of this study is to prepare WC-10Co-4Cr coatings using two processes of plasma spraying and high-velocity oxygen fuel (HVOF) spraying. The decarburization behaviors of…
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz