Industrial Lubrication and Tribology: Volume 70 Issue 9
Covers all automotive and industrial applications of lubricants
Table of contents
Studying the lubricity of new eco-friendly cutting oil formulation in metal working fluid
M.R. Noor El-Din, Marwa R. Mishrif, Satish V. Kailas, Suvin P.S., Jagadeesh K. MannekoteThis paper aims to formulate a new metal working fluid (MWF) composition including some eco-friendly emulsifiers, corrosion inhibitor, biocide, and non- edible vegetable oil…
Effect of roller dynamic unbalance on cage stress of high-speed cylindrical roller bearing
Yongcun Cui, Sier Deng, Yanguang Ni, Guoding ChenThe purpose of this study is to investigate the effect of roller dynamic unbalance on cage stress.
Halogen-free ionic liquids as synthetic ester oil antiwear additives
Zeyun WangThis paper aims to investigate the tribological properties of 1,4-bis(2-ethylhexyl) sulfosuccinate anion-based ionic liquids (ILs) when used as lubricant additives in synthetic…
Unsupervised segmentation of wear particle’s image using local texture feature
Hong Liu, Haijun Wei, Haibo Xie, Lidui Wei, Jingming LiThe possibility of using a pattern recognition system for wear particle analysis without the need of a human expert holds great promise in the condition monitoring industry…
Numerical optimization of surface texture for improved tribological performance of journal bearing at varying operating conditions
Ali Usman, Cheol Woo ParkJournal bearings are used in numerous rotary machines. The load carrying capacity and friction of a bearing have been major concerns in design. Recent developments in surface…
Analysis of dynamic characteristics of spiral groove liquid film seal considering cavitation
Mu-ming Hao, Wen-jing Yang, Heng-chao Cao, Lu-shuai Xu, Yun-lei Wang, Yong-fan LiThe purpose of this paper is to investigate the dynamic characteristics of a spiral groove liquid film seal considering the effect of cavitation.
Designs of low frictional coefficients for joint bearings by inlaying graphites and liquid spraying of MoS2
Jun Cao, Zhongwei YinThe purpose of this paper is to solve the problem of joint bearings that cannot work in high temperature because of their high frictional coefficients.
Investigation on spatial distribution and evolution features of the running-in attractor based on a new approach
Cong Ding, Hua Zhu, Guodong Sun, Chun Ling Wei, Yu JiangThe purpose of this work is to comprehensively reveal the spatial distribution and evolution features of a running-in attractor.
Tribological properties and mechanism of the bilayer iron based powder metallurgy materials
Guotao Zhang, Yanguo Yin, Ming Xu, Congmin LiThis paper aims to obtain high mechanical strength and good self-lubricating property of iron-based powder metallurgy materials. A new type of bilayer material with dense…
Tool wear in dry turning and wet turning with non-toxic cutting fluid
Dariusz Ozimina, Monika Madej, Joanna Kowalczyk, Ewa Ozimina, Stanislaw PlazaThis study aims to determine the properties of a new non-toxic cutting fluid and compared with cutting fluid based on mineral oil.
Effect of torque ratio on speed regulating start
Qingrui Meng, Zhao Chenghao, Tian ZuzhiFriction pairs of the hydro-viscous drive speed regulating start device should be designed based on the rated torque. To obtain design basis of the rated torque of the…
Wear analysis of PVD-coated twist drills under MQL
Marlon José Cardoso, Milton Luiz Polli, Giuseppe PintaudeDeep drilling of hardened steels is a difficult machining operation because of the high wear level of tools. This paper aims to present the main wear mechanisms observed in…
The importance of spectrum loading in 2% milled MoS2 powder greases using four ball wear test
Gabi N. NehmeLoading condition and minimizing friction and wear using molybdenum disulfide grease in aircraft engine bearings are the focus of this research. The relationship between the…
Effect of the micro-structure evolution of friction layer on the sliding tribology behavior of TiAl-10 Wt.% Ag at 16 N-0.5 m/s
Kang Yang, Hongru Ma, Xiyao Liu, Yangming ZhangThis paper aims to study the micro-structure evolution of friction layers to optimize the friction and wear behaviors of TiAl-based material. It further enlarges the scope of…
Preparation and tribological properties of Ag nanoparticles/reduced graphene oxide nanocomposites
Leihua Xu, Yong Zhang, Dekun Zhang, Mei LengThis paper aims to report the tribological behavior of Ag nanoparticles/reduced graphene oxide nanocomposites (Ag/RGO NCs) and Ag nanoparticles (Ag NPs) as a green additive in oil…
A FSI-thermal model to analyze performance characteristics of hydrostatic turntable
Chengpei Liu, Junping HuThis paper aims to study the performance of hydrostatic turntables by using fluid structure interaction (FSI) and thermal effect coupled model.
Effect of load on the tribological properties of Si3N4-hBN composite ceramics sliding against Si3N4
Dong Qiang Gao, Rui Wang, Wei ChenThe effect of the load on the tribological properties of Si3N4-hBN sliding against Si3N4 were investigated under dry and water lubrication condition.
Tribological properties of the epoxy resin-based solid lubricant coating modified by Kevlar fibers
Guotao Zhang, Yanguo Yin, Ting Xie, Dan Li, Ming Xu, Congmin LiThis paper aims to obtain high mechanical and good tribological properties of epoxy resin-based coatings under dry friction conditions.
Tribological properties of metallic nanoparticles as lubricant additives under the applied electric currents
Lina Si, Yan Pan, Xiaoqing Zhang, Jie Wang, Jia Yao, Yanjie Wang, Fengbin Liu, Feng HeThis paper aims to clarify the effects of metallic nanoparticles (NPs) additives and room temperature ionic liquids (ILs) on the tribological performance of electric contacts.
An experimental investigation on friction and wear test parameters of cylinder liner and piston ring pair using Taguchi technique
H.K. Trivedi, D.V. BhattThe purpose of this paper is to study about tribological parameters of cylinder liner/piston ring under sliding contact in the presence of lubricant.
Tribological behaviour of WC-10Co4Cr coated slurry pipe materials
Kaushal Kumar, Satish Kumar, Munish Gupta, Hem Chander GargThis paper aims at erosion wear experimentation conducted on two piping materials, namely SS202 and SS304 to establish the effect of rotational speed, concentration and time…
Improved energy conversion efficiency of the ultrasonic motor with surface texture
Xiaoliang Liu, Jinhao Qiu, Gai ZhaoThis paper aims to investigate the effect of frictional materials and surface texture on the energy conversion efficiency and the mechanical output performance of the ultrasonic…
Experimental study on wet skid resistance at different water-film thicknesses
Yunlong Jiao, Xiaojun Liu, Kun LiuDriving safety on a wet road is closely related to the wet skid resistance of tires. The purpose of this paper is to reveal the evolution of wet skid resistance at different water…
Effect of structural parameters of oil groove on hydro-viscous drive torque with variable rotational speed
Fangwei Xie, Xinjian Guo, Diancheng Wu, Bing Zhang, Xudong Zheng, Dengshuai Wang, Yun WangIn this paper, a kind of an oil groove structure which could improve the transmission torque of an oil film was designed, i.e. the width and depth of oil groove gradually decrease…
Influence of piezo-viscous behavior and load on the effectiveness of inlet zone bump in unidirectional pure sliding EHL line contacts
Punit KumarThe purpose of this paper is to introduce the concept of stationary inlet zone bump (IZB) for film thickness enhancement in unidirectional pure sliding elastohydrodynamic…
Taguchi approach to erosion wear optimization of WC-10Co-4Cr sprayed austenitic steel subjected to equisized slurry
Gurmeet Singh, Satish Kumar, Satbir S. SehgalThis paper aims to optimize the erosion wear analysis of slurry impeller material. Stainless steel (SS-410) was used as the pump impeller material. This erosion test was…
On hydrodynamic lubrication characteristics of ferrofluid film in a spiral groove mechanical seal
Penggao Zhang, Boqin Gu, Jianfeng Zhou, Long WeiThe purpose of this study is to investigate the hydrodynamic lubrication characteristics of ferrofluid film for spiral groove mechanical seal in external electromagnetic field and…
The size effect of hexagonal texture on tribological properties under mixed lubrication
Long Zheng, Yihang Gao, Yinghui Zhong, Guolong Lu, Zhenning Liu, Luquan RenThe purpose of this study is to elucidate the size effect (groove width, unit length and area density) of the hexagonal texture on tribological properties under lubrication.
Asymmetry characteristic of tilting-pad thrust bearing during the start-up and shut-down process
Zhanchao Wang, Fei Guo, Ying Liu, Xiangfeng Liu, Yuming WangThis aim of this paper has been to investigate the squeeze effect of a water-lubricated tilting-pad thrust bearing during start-up and shut-down periods.
Tribological behaviour and wear fashion of processed AA6061/ZrO2 composite
Johny James, Raja Annamalai A.This study aims to develop a less weight high wear resistant material to fabricate brake components especially in automotive sector.
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz