Industrial Lubrication and Tribology: Volume 72 Issue 3
Covers all automotive and industrial applications of lubricants
Table of contents
Establishment and solution of governing equation for plana-grooved liquid seals based on three-control-volume theory
Xiumin Zhang, Mingfu Yin, Huilai SunThis paper aims to study the dynamic characteristics of the straight-through labyrinth seals, which is applied on an oil sealing belt of hydrostatic support system (HSS) oil…
A scuffing model considering additive depletion in boundary lubrication
Bora Lee, Yonghun Yu, Yong-Joo ChoThis paper aims to propose a new scuffing model caused by the depletion of additives in boundary lubrication condition.
A modified approach based on bearing area curve for surface wear characterization
Yun Wang, Junhong Mao, Suwen Lu, Zhenying Xu, Hong Liu, Ruitao LiWear greatly influences the machine lifetime, performance and reliability and its quantification is very important. This paper aims to propose a modified bearing area curve method…
Fluid wetting infiltration mechanism at the micro-contact zone boundary of rubber–glass interfaces
Minghua Pang, Lijie Ma, Fanjing Meng, Zhankui Wang, Jianxiu SuThis paper aims to clarify the fluid infiltration mechanism at the micro-contact zone boundary of rubber-glass interfaces.
Mechanical research on aerostatic guideways in consideration of fluid-structure interaction
Ruzhong Yan, Liaoyuan Wang, Shengze WangThe purpose of this paper is to study the mechanical properties of aerostatic guideway taking the structural deformation into account, and further improve the calculation method…
Monitoring of EDM parameters to develop tribo-adaptive Ti6Al4V surfaces through accretion of alloyed matrix
Jibin T. Philip, Deepak Kumar, S.N. Joshi, Jose Mathew, Basil KuriachenElectrical discharge machining (EDM) is well-known for its credibility in the processing of advanced materials, which are electrically conductive. The strenuous effort associated…
Performance potential of gas foil journal bearings enhanced with micro taper-grooves on top foil
Ming Feng, Hongyang Hu, Tianming RenTo improve the load capacity and stability of gas foil journal bearings (GFJB), this paper aims to propose a novel GFJB with taper-grooved top foil.
Experimental investigation on the tribological property of functionalized graphene lubricant against steel
Yong Qian, Hongying Gong, Xiaoyun Zhao, Lei Cao, Weizhong Shi, Jianli HeThe purpose of this study is to corroborate the advanced tribological properties of graphene as a lubricant additive.
Effect of journal misalignment and coupled-stress lubricant on the film pressure of a double-layered porous journal bearing
Shitendu Some, Sisir Kumar GuhaIn the application of hydrostatic double-layered porous journal bearings, misalignment of bearing systems is a major problem. On the other hand, the use of coupled-stress fluid as…
Three-dimensional topography simulation research of diamond-wire sawing based on MATLAB
Ligang Zhao, Guofeng Xia, Yuhu Shi, Aisheng WuThe purpose of this paper is to study the influence of the processing parameters of diamond wire sawing on surface morphology and roughness.
Analysis of mechanical power loss of a helical gear pair based on the starved thermal-elastohydrodynamic lubrication model
Mingyong Liu, Peidong Xu, Jinxi Zhang, Huafeng DingPower loss is an important index to evaluate the transmission performance of a gear pair. In some cases, the starved lubrication exists on the gear contact interface. The purpose…
Effects of CeO2 on the microstructure and tribological properties of atmospheric plasma-sprayed Cr2O3-TiO2 coatings
Qingjun Ding, Gai ZhaoThe purpose of this paper is to study the mechanism and effect of rare earth oxides on the properties of Cr2O3-TiO2 coating.
Influence of natural barytes purity levels on the tribological characteristics of non-asbestos brake pads
Vijay R., Manoharan S., Lenin Singaravelu D.This paper aims to deal with the effect of natural barytes purity levels on the tribological performance of brake pads.
A study on the wear behavior of tin-based journal bearing under different working conditions
Hulin Li, Zhongwei Yin, Yanzhen WangThe purpose of this paper is to study the friction and wear properties of journal bearings under different working conditions.
Hydrodynamic effect of non-closed elliptical grooves of bi-directional rotation gas face seals
Jing Xie, Shaoxian Bai, Chunhong MaThe purpose of this paper is to improve opening performance of bi-directional rotation gas face seals by investigating the hydrodynamic effect of non-closed elliptical grooves.
Investigation of normal and tangential contact stiffness considering surface asperity interaction
Hongping Yang, Xiaowei Che, Cheng YangThis paper aims to propose a normal and tangential contact stiffness model to investigate the contact characteristics between rough surfaces of machined joints based on fractal…
Failure mechanisms of lubricating film on M50-Ag composites
Hongru Ma, Xiaobin Deng, Xiaoliang Shi, Guanchen Lu, Hongyan Zhou, Yuan Chen, Zhenyu YangThis paper aims to explore the damage mechanism of a lubricating film on the worn surface of solid self-lubricating composites under different loads.
Fluid-structure interaction on the dynamic characteristics of the hydrostatic spindle in micro-scale
Dongju Chen, You Zhao, Chunqing Zha, Jingfang LiuThe purpose of this paper is to investigate the effect of fluid–structure interaction in micro-scale on the performance of the hydrostatic spindle and improve the analysis…
The effect of liner surface texture on journal bearing performance under thermo-hydrodynamic conditions
Ahmed M. Saleh, Wael Crosby, Ibrahim M. El Fahham, M. ElhadaryThe purpose of this paper is to study the effect of liner surface texture on journal bearing performance. Modeling the profile curvature of the dimples or grooves is planned for…
Dynamic characteristics of opposed-conical gas-dynamic bearings
Yan Li, Desheng Zhang, Fuhai DuanThe purpose of this paper is to investigate dynamic characteristics of opposed-conical gas-dynamic bearings considering five degree-of-freedom motion, including translation and…
Fretting friction properties of laser surface texture microfilaments
Ke Li, Xiuping Dong, Mingji Huang, Ping ChenThis paper aims to improve the wear resistance of metal rubber microfilaments and the service life. The effect of surface texture by laser processing on the fretting friction…
Effect of rare earth oxide on the mechanical and tribological properties of polyimide nanocomposites
Yuanhao Yu, Jingfu Song, Gai Zhao, Qingjun DingThis paper aims to study the effect of different rare earth oxide on the tribological properties of polyimide (PI) nanocomposites based on the CNT and GO reinforcements.
Tribological properties of soft/hard hybrid surface of Babbitt alloy/steel
Yuquan Ni, Guangneng Dong, Qi Liu, Wei Wang, Yihong LiBabbitt bush is easy to cause severe adhesive wear due to unexpected journal fall. This paper aims to improve wear resistance of Babbitt bush.
On a model for the prediction of asperity interactions of the coated friction pair
Chunxing Gu, Shuwen WangSurface coatings have been introduced on the contact surfaces to protect the mechanical parts for a long time. However, in terms of the optimum design of coatings, some key…
Erosion wear analysis of HVOF coated Colmonoy-88 and Stellite-6 micron layers on pump impeller steel by using the Taguchi's approach
Gurmeet Singh, Satish Kumar, Satbir Singh Sehgal, Shashi Bhushan PrasadThis paper aims to depict the erosion performance of two HVOF-coated micron layers (Colmonoy-88 and Stellite-6) on pump impeller steel (SS-410) by using Taguchi's method…
Effect of grooved cylinder liner depths on the tribological performances of cylinder liner-piston ring
Chao Zhen Yang, Zhiwei Guo, Changkun XuFrictions in cylinder liner-piston ring often cause an inevitable loss of energy loss in the diesel engine. This study aims at evaluating the effect of depths in the cylinder…
Thermal oxidation behavior of trimethylolpropane trioleate base oil when exposed to iron surfaces
Yongliang Jin, Jian Li, Bingxue Cheng, Dan Jia, Jiesong Tu, Shengpeng Zhan, Lian Liu, Haitao DuanThis paper aims to investigate the thermal oxidation behavior of trimethylolpropane trioleate (TMPTO) base oil when exposed to Fe surfaces.
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz