Industrial Lubrication and Tribology: Volume 73 Issue 2
Covers all automotive and industrial applications of lubricants
Table of contents
SiO2 modified graphene oxide hybrids for improving fretting wear performance of ultra-high molecular weight polyethylene
Xiaocui Xin, Yunxia Wang, Zhaojie Meng, Fengyuan YanThe purpose of this paper is to investigate the fretting wear performance of ultra-high-molecular-weight-polyethene (UHMWPE) with addition of GO and SiO2.
Investigating the effect of load on tribological behaviour of Cu composite reinforced with Ti2SnC particles
Fangfang Zhang, Fengyun Yan, Tijun Chen, Xiaohong Li, Zhen WangThis paper aims to study the effect of load on the tribological behaviour of Cu-based composites, so as to obtain a suitable applied load on these composites.
Synergistic effect of Steel Slag-Molybdenum disulfide particles on fade-recovery performances of non-asbestos organic friction material
Sundarrajan D., Pitchipoo Pandian, Manoharan SembianThis paper aims to deal with the synergistic effect of steel slag-molybdenum disulfide particles on fade-recovery performances of non-asbestos organic friction material.
Effect of a transverse crack on the dynamic behaviours of a 3D rod-fastening rotor bearing system
Nanshan Wang, Heng Liu, Yi Liu, Qidan Wang, Shemiao Qi, Zhidong XuThis paper aims to examine the dynamic behaviours of a three-dimensional (3D) rod-fastening rotor bearing system (RFBS) with a crack in a fastening rod.
Optimal design of the slip–texture on a journal-bearing surface
Jian Jin, Xiaochao Chen, Yiyang Fu, Yinhui ChangThis work aims to explore the combined effects of boundary slip and texturing on hydrodynamic journal bearings and identifies optimized slip and texture patterns to improve the…
Multi-metal sulfide pre-blend combination on the tribological performance of the brake friction material
Sathickbasha K., Selvakumar A.S., Surya Rajan Balachandran, Hariharasakthisudhan P.The purpose of this study is the influence of various combinations of metal sulfides on the tribological performance of brake pads.
Damping characteristics of integral squeeze film dampers on vibration of deep groove ball bearing with localized defects
Yifan Hao, Chengdong Zheng, Xiaojing Wang, Chao Chen, Ke Wang, Xin XiongThis work aims to demonstrate the vibration suppression of the rotor system with localized defects on bearing using an integral squeeze film damper (ISFD).
A compounding-model comprising back propagation neural network and genetic algorithm for performance prediction of bio-based lubricant blending with functional additives
Tong Yu, Peng Yin, Wei Zhang, Yanliang Song, Xu ZhangThe amount, type and addition conditions of additives of lubricants should be continuously adjusted to obtain appealing performance. To obtain the optimal pretreatment parameters…
Numerical approach to interpret the attributes of porous journal bearings using couple-stress fluid
Shalini M. Patil, C.V. Vinay, Dinesh P.A.The purpose of this paper is to study the amalgamated consequences of nonNewtonian fluid and permeability for nonporous journal spinning with constant tangential velocity inside a…
Tribological behaviors of the water-lubricated rubber bearings under different lubricated conditions
Bin Xiao, Xiaolin Zheng, Yi Zhou, Dan Yao, Yang WanThis study aims to evaluate the tribological behavior of water-lubricated rubber bearings sliding against stainless steel under different lubricate conditions.
Influence of premixed dual metal sulfides on the tribological performance of copper-free brake friction materials
Vijay R., Manoharan S., Nagarajan S., Lenin Singaravelu D.The purpose of this study is to deals with the effect of premixed dual metal sulfides (tin disulfide + iron disulfide) as a replacement for antimony trisulfide on the tribological…
Friction characteristics of moving joint surface from the micro and macro scale
Lixin Hai, Feng Gao, Yan Li, Bo Yang, Yanyan ZhuThe nonlinear friction disturbance of the moving joint surface of the feed system can lead to the residual vibration of the system, prolong the stability time of the system and…
Effect of changing geometrical characteristics for different shapes of a single ridge passing through elastohydrodynamic of point contacts
Mohamed Abd AlsamiehThe purpose of this paper is to study the behavior of a single ridge passing through elastohydrodynamic lubrication of point contacts problem for different ridge shapes and sizes…
Antiwear and extreme pressure properties of hazelnut oil blended with ZDDP
Wani Khalid Shafi, M.S. CharooThe paper aims to investigate the effect of zinc dialkyldithiophosphate (ZDDP) on wear and extreme pressure (EP) capabilities of hazelnut oil.
Preparation and optimization of a soft magnetic brake friction material based on permalloy additive
Xiaoyang Wang, Jiusheng Bao, Jinge Liu, Yan Yin, Tonggang Liu, Shaodi ZhaoThis paper aims to develop of magnetic field controlled friction braking technology, a novel brake friction material with magnetic was designed and prepared in this paper.
An active control for hydrostatic journal bearing using optimization algorithms
Waheed Ur Rehman, Xinhua Wang, Yingchun Chen, Xiaogao Yang, Zia Ullah, Yiqi Cheng, Marya KanwalThe purpose of this paper is to improve static/dynamic characteristics of active-controlled hydrostatic journal bearing by using fractional order control techniques and optimizing…
Research on optimization of spindle bearing preload based on the efficiency coefficient method
Pingping He, Feng Gao, Yan Li, Wenwu Wu, Dongya ZhangThe purpose of this paper is to research on optimization of spindle bearing preload based on efficiency coefficient method and provide theoretical guidance for variable preload of…
Structural design of high-speed rolling bearing test rig spindle with cantilever
Hui Li, Hao Li, Rongfeng Zhang, Yi Liu, Shemiao Qi, Heng LiuThe purpose of this paper is to introduce the structure design process of the cantilever spindle with limited installation space and wishing to increase its critical speed.
Rotor-dynamic performance of porous hydrostatic thrust bearing operating under magnetic field
Vivek Kumar, Vatsalkumar Ashokkumar Shah, Simran Jeet Singh, Kuldeep Narwat, Satish C. SharmaThe porous bearings are commonly used in slider thrust bearings owing to their self-lubricating properties and cost effectiveness as compared to conventional hydrodynamic…
Improvement of thermal EHL by selecting bush-pin geometry based on an investigation for industrial chains
Mingyu Zhang, Jing Wang, Peiran Yang, Yi Liu, Zhaohua Shang, Longjie DaiThis study aims to investigate the influence of geometry of bush-pin pair from a perspective of optimal lubrication through a thermal elastohydrodynamic lubrication model for…
Experimental investigation on wheel–rail adhesion characteristics under water and large sliding conditions
Jiajun Zhou, Mengling Wu, Chun Tian, Zewang Yuan, Chao ChenThe purpose of this study is to investigate the adhesion characteristics of the wheel–rail under water and large sliding conditions. This is carried out by conducting a series of…
An improved TEHL analysis of textured roller bearings consider various texture parameters and slip
Junning Li, Ka Han, Wuge Chen, Xiaojie Tang, Qian WangThe purpose of this study is to reveal the lubrication performance of textured roller bearings under various texture size, texture depth, texture types and slip.
Load carrying capacity of a novel magnetic-liquid double suspension fixed pad thrust bearing
Shengtong Wang, Ouyang Wu, Zhe Li, Bin WangProposing a new type of water-lubricated thrust bearing meets the load-bearing requirements of high-power shaft-less rim driven thrusters.
Mechanical and tribological properties of waste iron scale reinforced polypropylene composite
Azmi Erdogan, Mustafa Sabri Gök, Bilal Kurşuncu, Tayfun Kiraz, Bilal DemirelIn this study, waste iron scale, which occurs in high amounts during steel production and contains high amounts of iron element, was used as a reinforcing material in the…
Leakage and rotordynamic characteristics of labyrinth seal and hole-pattern damping seal with special-shaped 3D cavity
Xuan Zhang, Jin-Bo Jiang, Xudong Peng, Jiyun LiThe purpose of this paper is to enhance sealing and rotordynamic performance of hole-pattern damping seal (HPDS) and labyrinth seal (LS) by structural innovation and geometrical…
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz