COMPEL - The international journal for computation and mathematics in electrical and electronic engineering: Volume 25 Issue 1

Subject:

Table of contents - Special Issue: Selected Papers from the 18th Symposium on Electromagnetic Phenomena in Nonlinear Circuits 2004

Guest Editors: Prof Dr Andrzej Demenko Coeditors, Prof Kay Hameyer, Prof Dr Lech Nowak, Prof Dr Krzysztof Zawirski

A time‐domain finite element homogenization technique for lamination stacks using skin effect sub‐basis functions

P. Dular, J. Gyselinck, L. Krähenbühl

To develop a homogenization technique to directly and efficiently take the eddy current effects in laminated magnetic cores within time domain finite element (FE) analyses.

Trigonometric interpolation at sliding surfaces and in moving bands of electrical machine models

Herbert De Gersem, Mariana Ion, Markus Wilke, Thomas Weiland, Andrzej Demenko

To propose trigonometric interpolation in combination with both sliding‐surface and moving‐band techniques for modelling rotation in finite‐element electrical machine models. To…

Finite element analysis of saturation effects in a tubular linear permanent magnet machine

Andrzej Demenko, Ernest Mendrela, Wojciech Szeląg

The aim of the paper is to find the simple and accurate model for the analysis of a drive with a tubular linear permanent magnet machine (TLPMM). Attention is paid to the models…

On the definition of energy in general electromagnetic media

André Nicolet, Frédéric Zolla

Proposes to posit a clear definition of the energy stored in general electromagnetic media.

Interpolation technique for effective determination of switching time instants for field‐circuit coupled problems with switching elements

Galina Benderskaya, Herbert De Gersem, Thomas Weiland, Markus Clemens

To provide a numerical technique for the quick and simple determination of the switching time instants for field‐circuit coupled problems with switching elements.

An energy‐based vector hysteresis model for ferromagnetic materials

François Henrotte, André Nicolet, Kay Hameyer

Proposes a new quasi‐static vector hysteresis model based on an energy approach, where dissipation is represented by a friction‐like force.

Inclusion of a stress‐dependent Preisach model in 2D FE calculations

A. Benabou, L. Vandenbossche, J. Gyselinck, S. Clenet, L. Dupré, P. Dular

Mechanical stress can heavily affect the magnetic behaviour law in ferromagnetic materials. This paper, aims to take into account the effect of mechanical stress into a…

Determination of the magnetic parameters at no‐load of a variable reluctance machine excited by DC and AC currents

S. Taïbi, A. Tounzi, F. Piriou

Aims to determine the magnetic parameters at no‐load of a variable reluctance machine excited by DC and AC currents.

Reducing power losses in axisymmetric electromechanical converters

Jacek Mikołajewicz, Lech Nowak

The aim of the paper is to find the effective methods of power loss reduction in axisymmetric electromagnetic devices and improve their dynamic parameters. As an example the…

Slot harmonics in cage motors due to saturation of a main magnetic circuit

Tadeusz Sobczyk, Konrad Weinreb, Maciej Sułowicz, Tomasz Węgiel, Adam Warzecha

To study effects in the Fourier spectra of cage motor phase currents due to saturation of the main magnetic circuit by the fundamental MMF harmonic.

High frequency extension of non‐linear models of laminated cores

D. Roger, E. Napieralska‐Juszczak, A. Henneton

The paper gives a new measurement method of the parameters characterising the magnetic laminations for broadband low‐level signals defined at any operational point.

Hysteresis losses in soft magnetic composite materials

Bogomir Zidarič, Mykhaylo Zagirnyak, Konrad Lenasi, Damijan Miljavec

To analyze the Jiles and Atherton hysteresis model used for hysteresis losses estimation in soft magnetic composite (SMC) material.

Mathematical model of an electromechanical actuator using flux state variables applied to reluctance motor

Wojciech Burlikowski

Aims to present a new approach for formulating state‐space equations of an electromechanical actuator using magnetic flux linkages as state variables.

1297

Identification of the induction motor parameters at standstill using soft computing methods

Teresa Orlowska‐Kowalska, Joanna Lis, Krzysztof Szabat

The paper sets out to deal with the off‐line identification of induction motor (IM) parameters at standstill. Determination of values of the IM parameters is essential in…

Properties of sensorless control systems based on multiscalar models of the induction motor

Zbigniew Krzemiński, Arkadiusz Lewicki, Mirosław Włas

To develop general forms of multiscalar models of the induction motor and to present properties of the sensorless control systems based on such models.

Distribution of the potential and current density in the electrode of the PEM fuel cell

Eugeniusz Kurgan, Paweł Schmidt

Distribution of the electric potential and current density in the electrode of the proton exchange membrane fuel cell.

Artificial neural network based robust speed control of permanent magnet synchronous motors

Tomasz Pajchrowski, Konrad Urbański, Krzysztof Zawirski

The aim of the paper is to find a simple structure of speed controller robust against drive parameters variations. Application of artificial neural network (ANN) in the controller…

Direct control for AC/DC/AC converter‐fed induction motor with active filtering function

Marek Jasinski, Mariusz Cichowlas, Marian P. Kazmierkowski

Proposes the application of novel control strategy in power transistors (insulated gate bipolar transistors – IGBT) based on AC/DC/AC converter with active filtering function…

1474

A serial AC voltage controller using bipolar matrix‐reactance chopper

Zbigniew Fedyczak, Leszek Frąckowiak, Maciej Jankowski

Aims to focus on steady state and transient state analysis of basic properties of new solution for a single‐phase serial AC voltage controller. Furthermore, simulation and…

Cover of COMPEL - The international journal for computation and mathematics in electrical and electronic engineering

ISSN:

0332-1649

Online date, start – end:

1982

Copyright Holder:

Emerald Publishing Limited

Open Access:

hybrid

Editor:

  • Prof Jan Sykulski