Multidiscipline Modeling in Materials and Structures: Volume 13 Issue 1

Stokes’ first problem for MHD flow of Casson nanofluid

Syed Tauseef Mohyud-din, Umar Khan, Naveed Ahmed, M.M. Rashidi

The purpose of this paper is to present investigation of the flow, heat and mass transfer of a nanofluid over a suddenly moved flat plate using Buongiorno’s model. This study is…

Topology optimization-based design method of dual-band antennas

Qi Wang, Renjing Gao, Shutian Liu, Chuan Liu

Recent development of wireless communication devices dictates that miniaturization, multi-functions and high integration are the important factors for antenna structures. This has…

A symplectic Runge-Kutta method for the analysis of the tethered satellite system

Nuan Fang Xu, Zi-Chen Deng, Yan Wang, Kai Zhang

The purpose of this paper is to study the dynamic vibrations of the tethered satellite system (TSS).

Basic models in dielectric spectroscopy of heterogeneous materials with semiconductor inclusions

A.S. Tonkoshkur, A.B. Glot, A.V. Ivanchenko

The purpose of this paper is to develop the models of the dielectric permittivity dispersion of heterogeneous systems based on semiconductors to a level that would allow to apply…

Multi-objective optimization in end milling of GFRP composites using Taguchi techniques with principal component analysis

M.P. Jenarthanan, R. Gokulakrishnan, B. Jagannaath, P. Ganesh Raj

The purpose of this paper is to find out the optimum machining parameters using Taguchi technique with principal component analysis (PCA) during end milling of GFRP composites.

A virtual model for non-catalytic successive gas-solid reactions

Bahador Abolpour, M. Mehdi Afsahi

Many of the industrially important processes follow a complex reaction scheme and more than one reaction takes place simultaneously for these systems. Design and scale up of these…

A fiber-reinforced thermoelastic medium with an internal heat source due to hydrostatic initial stress and gravity for the three-phase-lag model

Samia M. Said

The purpose of this paper is to investigate the effect of a hydrostatic initial stress and the gravity field on a fiber-reinforced thermoelastic medium with an internal heat…

Basic solution of two collinear mode-I cracks in the orthotropic medium by use of the non-local theory

Haitao Liu

The purpose of this paper is to present the basic solution of two collinear mode-I cracks in the orthotropic medium by the use of the non-local theory.

A novel approach for the fabrication of low-stress bimorph RF-MEMS switches

Hitesh Kumar Sharma, Shalu Rani

The purpose of this paper is to design a low-cost stress bimorph RF-MEMS switch which is the desired transmission area application.

The effect of temperature-dependent properties on generalized magneto-thermo-elastic medium with two-temperature under three-phase-lag model

Mohamed I.A. Othman, Yassmin D. Elmaklizi, Nehal T. Mansoure

The purpose of this paper is to investigate the propagation of plane waves in an isotropic elastic medium under the effect of rotation, magnetic field and temperature-dependent…

A direct way for the sensitivity analysis of modal assurance criterion of a sliding machine working table

Hongliang Tian, Yuan Yu

This study considers a Lagrange direct way of modal assurance criterion (MAC) values of an undamped system. The mentioned method for the sensitivity analysis of the MAC of a…