Table of contents - Special Issue: ICEAF III - Part B
Guest Editors: Professor Spiros Pantelakis
Characterization of the fracture behaviour of X42 microalloyed pipeline steel
Halil Ibrahim Ünal, Hakan Atapek, Baran Gürkan Beleli, Seyda Polat, Serap Gümüs, Ersoy ErisirThe purpose of this paper is to investigate the fracture of grade X42 microalloyed steel used as pipe material after tensile test at room temperature and impact tests at 0, −20…
Metallographic examination of an AISI H11 mandrel of a bridge die used in hot extrusion: Case study
Carmen Medrea, Antonios Kalfopoulos, Dimitrios Papageorgiou, Ionel ChicinasA local company producing aluminum profile encounters frequent failures to bridge dies. In total, 22 dies failed within a year, entailing production disruptions and extensive…
Microstructural, surface and fatigue analysis of stress peened leaf springs
Georgios Savaidis, Stylianos Karditsas, Alexander Savaidis, Roselita FragoudakisThe purpose of this paper is to investigate the fatigue and failure of commercial vehicle serial stress-peened leaf springs, emphasizing the technological impact of the material…
Determination of defects on a processed disc from S355J2 steel
Theofani Tzevelekou, Spyros Papaefthymiou, Vasiliki Panteleakou, Athanasios Vazdirvanidis, Dimitris C. Papamantellos, Panagiotis SismanisA failed disc that was forged from S355J2 round bar was investigated in order to determine the failure route cause. The purpose of this paper is to determine the defects and route…
Study of corrosion of copper in industrial cooling systems
Ioannis A Kartsonakis, Elias P. Koumoulos, Antonis Karantonis, Costas A. Charitidis, S Dessypris, A MonosThe purpose of this paper is to perform the evaluation of copper susceptibility to corrosion in industrial cooling systems. Microstructure and defects of copper are observed…
Overload capacity of a Wolfrom type planetary system
Athanassios Mihailidis, Ioannis Nerantzis, Emmanouil AthanasopoulosThe purpose of this paper is to introduce an alternative approach to the FE modelling and simulation of complex gear trains, such as the Wolfrom planetary system, in order to…
Alternation of the dynamic coefficients of short journal bearings due to wear
Michael G. Papanikolaou, Michael G. Farmakopoulos, Chris A. PapadopoulosWear in journal bearings occurs when the operating conditions (high load, high temperature, low angular velocity or low viscosity), downgrade the ability of the bearing to carry…
ISSN:
1757-9864Online date, start – end:
2010Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Dr. José A.F.O. Correia
- Prof. Shun-Peng Zhu