Anti-Corrosion Methods and Materials: Volume 67 Issue 1

Electrochemical and biological response of titanium (cp-Ti) after silicon ion implantation

K.M. Deen, A. Farooq, M. Rizwan, A. Ahmad, W. Haider

This study/paper aims to the authors applied low “Si” ions dose over cp-Ti-2, and the potent dose level was optimized for adequate corrosion resistance and effective proliferation…

Corrosion behavior of heat-treated and cryorolled Al 5052 alloys in different chloride ion concentrations

Anasyida Abu Seman, Ji Kit Chan, Muhammad Anas Norazman, Zuhailawati Hussain, Dhindaw Brij, Azzura Ismail

This paper aims to investigate the corrosion behaviour of heat-treated and cryorolled Al 5052 alloys in different Cl⁻ ion concentrations.

Functionally Nb graded inconel 718 alloys fabricated by laser melting deposition: mechanical properties and corrosion behavior

Xiaoqing Ni, Liang Zhang, Wenheng Wu, Dexiang Zhu, Decheng Kong, Chaofang Dong, Guoliang Zhu

Laser melting deposition (LMD) is an advanced additive manufacturing (AM) technology without powder waste, and nickel-based alloys with different Nb contents were created one-time…

Study on the corrosion resistance performance of PbO2-ZrO2 nanocomposite electrode in NaCl electrolyte solution

Ganggang Teng, Feng Wei, Yingwu Yao

This paper aims to improve the corrosion resistance performance and stability of PbO₂ electrodes in chloride wastewater.

Effect of Al on the microstructure, corrosion behavior and mechanical properties of Mg-4Li

Cheng Zhang, Liang Wu, Zilong Zhao, Guangsheng Huang, Bin Jiang, A. Atrens, Fusheng Pan

This paper aims to investigate microstructure, corrosion behavior and mechanical properties of Mg-4Li and Mg-4Li-3Al.

Electrodeposition of Ni-W and Ni-W-P films using a pulse current technique and their application for hydrogen evolution in an acidic solution

Zeinab Abdel Hamid, H.B. Hassan, Mohamed Sultan

The improvement of the hydrogen evolution reaction (HER) performance requires more efficient and inexpensive electrocatalysts. The purpose of this study is to prepare Ni-W and…

Titanium carbide’s effects on coatings formed on D16T aluminum alloy by plasma electrolytic oxidation

Wanying Liu, Junjie Yang, Yuhong Qiu, Ying Liu, Kuanhai Deng

The preferable concentration of titanium carbide was optimized and added as an additive to the micro-arc oxidation electrolyte to produce a high corrosion-resistant coating on…

Rebar corrosion behavior of coral aggregate seawater concrete by electrochemical techniques

Zhangyu Wu, Hongfa Yu, Haiyan Ma, Bo Da, Yongshan Tan

Coral aggregate seawater concrete (CASC) is a new type of lightweight aggregate concrete that is becoming widely used in reef engineering. To investigate the corrosion behavior of…

The effects of Cl− and direct stray current on soil corrosion of three grounding grid materials

Zhiping Zhu, Chun Shi, Yu Zhang, Zhifeng Liu

The purpose of this paper is to study the effects of Cl⁻ and direct stray current on the soil corrosion of three grounding grid materials.

Prediction of contact fatigue life of AT40 ceramic coating based on neural network

Renze Zhou, Zhiguo Xing, Haidou Wang, Zhongyu Piao, Yanfei Huang, Weiling Guo, Runbo Ma

With the development of deep learning-based analytical techniques, increased research has focused on fatigue data analysis methods based on deep learning, which are gaining in…

Effect of Al on microstructure and mechanical properties of as-cast Mg-8Gd-4Y-1Zn alloy

Yongxin Zhou, Qian Li, Zhiguo Xing, Renze Zhou, Zhenhua Huang, Yanfei Huang, Weiling Guo

This paper aims to investigate the effect of aluminum addition on the microstructure and mechanical properties of Mg-8Gd-4Y-1Zn alloy.

Corrosion performance of steel reinforcement in concrete admixed with magnesium chloride and sulphate

Raghu Babu U., Kondraivendhan B.

Besides with a large amount of Na⁺ and Cl⁻ ions in seawater, the presence of Mg⁺² and SO₄⁻² ions builds more complex corrosion mechanism. This paper aims to investigate the…

Investigations on strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental forming

G. Yoganjaneyulu, V.V. Ravikumar, C. Sathiya Narayanan

The purpose of this paper is to investigate the strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental…