Industrial Lubrication and Tribology: Volume 69 Issue 6
Covers all automotive and industrial applications of lubricants
Table of contents
Analysis of coning and lubrication at flexspline cup and cam interface in conventional harmonic drives
Bikash Routh, Rathindranath Maiti, Asok Kumar RayIn a harmonic drive during assembly of its components like strain wave generating (SWG) cam, flexspline (FS) and circular spline, a gap is formed between the cam’s outer surface…
Experimental study of wear for implant materials under dry sliding conditions
Soumyajit Mojumder, Soumya Sikdar, Subrata Kumar GhoshArtificial biomaterials are implanted to the human body to support the structure depending upon the extent of deformity or damage. This paper aims to formulate an experimental…
The effect of round corner on lubrication of high speed cylindrical roller bearings considering skidding
Wei Cao, Jiaxu Wang, Wei Pu, Ying Zhang, Jiqiang Wu, Si Ren, Jianbing LongPrevious studies were mainly focused on profile designation of bearing rollers and lubrication performance without considering roller-races skidding. However, the width of round…
Behaviour of two-lobe hole-entry hybrid journal bearing system under the combined influence of textured surface and micropolar lubricant
Chandra B. Khatri, Satish C. SharmaThe aim of the present paper is to study the combined influence of textured surface and micropolar lubricant behaviour on the performance of two-lobe hole-entry hybrid journal…
Effect of chromium content on cementite – pearlite interaction of white cast iron during three-body abrasive wear
Baochao Zheng, Zhifu Huang, Jiandong Xing, Yiyang Xiao, Fan XiaoThis paper aims to demonstrate the effect of varying chromium content on the wear behavior of white cast iron, to study the interaction relationship between cementite and pearlite…
Feature extraction of rolling bearing fault signal based on local mean decomposition and Teager energy operator
Jianhua CaiThis paper aims to explore a new way to extract the fault feature of a rolling bearing signal on the basis of a combinatorial method.
Micro-scratch behaviour of adsorbed film formed by aqueous copolymer lubricants with phosphate ester additive on Ti-coated surface
Bingjing Lin, A. Kiet Tieu, Hongtao Zhu, Buyung Kosasih, Oyong NovarezaThis paper aims to assess the adsorption behaviour and the adhesion strength of lubricant films formed by polypropylene oxide-polyethylene oxide-polypropylene oxide (PPO-PEO-PPO…
Synthesis and properties of thiadiazole lubricant additives
Weiguo Xue, Wenquan Ma, Xiaohong Xu, Tao Li, Xuguang Zhou, Peng WangThiadiazole compounds and their derivatives have carrying capacity and good lubricating properties. However, their poor oil-solubility limited their wide usage in lubricating oil…
Life of cutlery cutting tools: effects of surface finish
Wilian da Silva Labiapari, Henara Lillian Costa, José Daniel Biasoli De MelloThe progressive wear of cutting tools used in industrial cutlery production results in excessive burr formation and reduces tool service life. This paper aims to investigate the…
Relationship between elliptical form error and rotation accuracy of hydrostatic journal bearing
Jun Zha, Yaolong Chen, Penghai ZhangThe form error of shaft and hole parts is inevitable because of the machining error caused by rotation error of tool axis in machine tools where the elliptical form error is the…
Friction and wear behavior of pin-bushing with magnetorheological fluids
Peng Zhang, Gwanghee Lee, Chulhee Lee, Hyung YoonThe purpose of this paper is to carry out research on friction and wear behavior of pin-bushing with magnetorheological fluids (MRFs).
A comparative study of the friction and wear performance of Fe-based bulk metallic glass under different conditions
Dawit Zenebe Segu, Pyung HwangThis study aims to compare the friction and wear behaviors of Fe68.3C6.9Si2.5 B6.7P8.8Cr2.2Al2.1Mo2.5 bulk metallic glass (BMG) under sliding using dry, deionized water-lubricated…
The effect of the arc on annular-thrust aerostatic porous bearings
Polina V. Khan, Dawit Zenebe Segu, Pyung HwangAerostatic porous bearings are important for guide rails and spindles. It is well-known that flow restrictors made of porous materials offer major advantages over conventional…
Fabrication of Al/Babbitt surface bearing through friction stir processing
Seyed Mohammad Arab, Seyed Reza Hosseini Zeidabadi, Seyed Ahmad Jenabali Jahromi, Habib Daneshmanesh, Seyed Mojtaba Zebarjad, Kamal JanghorbanA self-lubricant surface composite including Al matrix and Babbitt alloy 11 reinforcement has been fabricated via friction stir processing (FSP).
Tribological properties of hydrogen free DLC in self-mated contacts against ZDDP-added oil
Abdul Mannan, Mohd Faizul Mohd Sabri, M.A. Kalam, H.H. MasjukiThe purpose of this study is to investigate the tribological properties of tetrahedral diamond-like carbon (DLC) films in self-mated contacts in the presence of additivated and…
Frictional wear stability mechanisms of an activated carbon composite derived from palm kernel by phase transformation study
Dayang Nor Fatin Mahmud, Mohd Fadzli Bin Abdollah, Nor Azmmi Bin Masripan, Noreffendy Tamaldin, Hilmi AmiruddinThe purpose of this paper is to investigate the mechanisms of frictional wear stability of an activated carbon composite derived from palm kernel using phase transformation study.
Surface temperature and wear particle analysis of vertical motion double-nut ball screws
Jeng-Haur Horng, Shin-Yuh Chern, Chi-Lin Li, Yang-Yuan ChenThis paper aims to investigate the temperature and wear properties of vertical ball screws and to discuss the surface design of ball screws in industrial applications.
Experimental study of starvation in grease-lubricated finite line contacts
Zhijian Wang, Xuejin Shen, Xiaoyang Chen, Qiang Han, Lei ShiThe purpose of this paper is to study starvation in grease-lubricated finite line contacts and to understand film-forming mechanisms of grease-lubricated finite line contacts.
Discriminating the lubrication condition from the rotor bearing fault in induction motors using Margenau-Hill frequency distribution and artificial neural networks
Misael Lopez-Ramirez, Rene J. Romero-Troncoso, Daniel Moriningo-Sotelo, Oscar Duque-Perez, David Camarena-Martinez, Arturo Garcia-PerezAbout 13 to 44 per cent of motor faults are caused by bearing failures in induction motors (IMs), where lubrication plays a significant role in maintaining rotating equipment…
Numerical study of surface dimple phenomenon by starvation in simple sliding contact
Shun Cui, Hiroshi Nishikawa, Jing Wang, Qian ZouThis study aims to use a thermal elastohydrodynamic lubrication (EHL) algorithm incorporating an Eyring flow model to solve a steady-state contact in simple sliding motion.
Squeeze film performance of parallel annular plates by ferrofluid couple stress lubricant considering effects of rotational inertia
Nioosha Ghasemi Dolatsara, Maghsood Daliri, Moharram ShameliThe purpose of this paper is to investigate squeezing and rotating motions between two parallel annular discs lubricated by ferro-fluid couple stress lubricant in the presence of…
Investigation of slip/no-slip surface for two-dimensional large tilting pad thrust bearing
Zhixiang Song, Fei Guo, Ying Liu, Songtao Hu, Xiangfeng Liu, Yuming WangThis paper aims to present the slip/no-slip design in two-dimensional water-lubricated tilting pad thrust bearings (TPTBs) considering the turbulence effect and shifting of…
Optimization of hybrid aluminum composites wear using Taguchi method and artificial neural network
Blaza Stojanovic, Jasmina Blagojevic, Miroslav Babic, Sandra Velickovic, Slavica MiladinovicThis research aims to describe the influence of weight per cent of graphite (Gr), applied load and sliding speed on the wear behavior of aluminum (Al) alloy A356 reinforced with…
Effect of surface roughness and deformation on Rayleigh step bearing under thin film lubrication
Rahul Kumar, Mohammad Sikandar Azam, Subrata Kumar Ghosh, Hasim KhanThe aim of this paper is to study the effect of deterministic roughness and small elastic deformation of surface on flow rates, load capacity and coefficient of friction in…
Wear behavior of micro-coined steel surfaces under mixed lubrication:
Andreas Rosenkranz, Saad Ahmed Khan, Adam Szurdak, Gerhard Hirt, Carsten GachotThe purpose of this study is to investigate the influence of hemispherical structures fabricated by hot micro-coining on the resulting wear performance. Hemispherical structures…
Rapid calculation method for estimating static and dynamic performances of closed hydrostatic guideways
Zhiwei Wang, Yi Liu, Feng WangThe purpose of this paper is to establish a simplified model of the closed hydrostatic guideway for the rapid analysis of static and dynamic characteristics. Further, the…
Theoretical analysis and experimental study on thermal stability of high-speed motorized spindle
Zhe Liu, Wei Chen, Desheng Li, Wenjing ZhangIn high-speed processing, the influence on the machining accuracy of a machine tool is greatly caused by the thermal deformation of the motorized spindle; a further study on the…
Research on rheological and flow behavior of lubricating grease in extremely cold weather
Fei Yan, Ziyu Wang, Yuchen Du, Shijie Su, Yan Zheng, Qinfeng LiThis paper aims to investigate the flow characteristics of lubricating grease in extremely cold weather in which it is difficult to convey the grease due to a huge pressure drop.
Integral transform solution for the analysis of hydrodynamic lubrication of thrust bearings
Nielson Veloso Medeiros, Emanuel Negrão Macêdo, Rui Nelson Otoni Magno, Claudio José Cavalcante Blanco, João Nazareno Nonato QuaresmaThe aim of this paper is related to an analysis of hydrodynamic lubrication of circular thrust bearings.
Low friction of phytic acid as a water-based lubricant additive
Yong Wan, Yankun Yu, Shuai Gao, Jianguo GaoThe purpose of this paper is to evaluate naturally occurring phytic acid (PA) as a green-water-based lubricant.
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz