Table of contents
Sandblasting: the only way to eliminate rust?
G. Batis, N. Kouloumbi, E. SoulisThe aim of the present work was to compare the performance of two coating systems applied on steel specimens. The first of them demands sandblasting pretreatment of the metal…
Thiophenol as an inhibitor for the corrosion and hydrogen permeation through mild steel in acidic solutions
K. Madhavan, S. Muralidharan, S. Venkatakrishna IyerThe influence of thiophenol on the corrosion and hydrogen permeation 1M HCl and 0.SM H2SO4 has weightloss measurements, gasometric studies and other electrochemical techniques…
Performance of duplex stainless steels in organic acids
Pasi Kangas, Mark NewmanConsiders the advantages of highly alloyed stainless steel such as duplex stainless steels or nickel‐based alloys in highly corrosive environments. Looks at corrosion rates for…
Role of hydrogen and hydroxyl ion in cathodic disbondment
N. Kamalanand, G. Gopalakrishnan, S.G. Ponnambalam, J. Mathiyarasu, R.N. Natarajan, P. Subramaniam, N. Palaniswamy, N.S. RengaswamyThe most economical way of protecting pipelines is through the application of organic coatings and wrappings. To make the protection foolproof at holidays and pores, cathodic…
Corrosion behaviour of Inconel 600 and 601 in orthophosphoric acid solutions
M. Vishnudevan, G. Venkatachari, S. Muralidharan, N.S. RengaswamyThe corrosion behaviour of Inconel 600 and 601 alloys has been evaluated by DC polarisation method in orthophosphoric acid solution of concentrations 0.5N to 15N. The passivation…
Corrosion of copper metal in distillation process
Safaa T. Keera, Elham A. Eissa, Afaf R. TamanCorrosion in atmospheric distillation is caused by hydrochloric acid produced by the hydrolysis of water soluble magnesium and calcium chlorides found in the crude oil. Corrosion…
Synergistic and biocidal effects of 1‐hydroxyethane ‐1, 1‐diphosphate, Zn2+ and polycrylamide on the inhibition of corrosion of mild steel in neutral aqueous environment
S. Rajendran, B.V. Apparao, N. PalaniswamyThe formulation consisting of 300ppm 1‐hydroxyethane‐1, 1‐diphosphonic acid (HEDP), 50ppm polyacrylamide (PAA) and 50 ppm Zn2+ offered 99 per cent corrosion inhibition and 99 to…
Stress induced embrittlement of stainless steel
D. Mukherjee, R. Rajmohan, B. Rathapan, V. Rajkumar, S. RamanThe paper discusses the aspect of probable stress induced embrittlement of 304 stainless steel stresses originating from thermal exposure, uniaxial tension, and reverse bending…
ISSN:
0003-5599Online date, start – end:
1954Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Yu Yan