Pigment & Resin Technology: Volume 29 Issue 2

Strapline:

The international journal of colorants, polymers and colour applications
Subjects:

Table of contents

Long‐term natural weathering of coated ThermoWood

Saila Jämsä, Pirjo Ahola, Pertti Viitaniemi

Heat treatment reduces hygroscopicity and accompanying dimensional changes in wood. Prior to coating, pine and spruce boards were heat treated at 225°C for six hours under steam…

FT‐IR spectroscopic studies on degradation of lac resin – part II: ageing and UV irradiation

P.C. Sarkar, A.K. Shrivastava

Applies FT‐IR spectroscopic techniques to study the degradative process occurring on ageing/UV irradiation of lac resin. Unequivocally concludes that hydroperoxidation and…

1243

Use of unconventional oils in surface coatings: blends of alkyd resins with epoxy esters

Madhu Bajpai, Sunita Seth

The alkyd resin of short oil length with low acid value was modified with novolac‐based epoxy esters, prepared by using tobacco seed oil fatty acids. The prepared blends were…

Synthetic reaction of rosin‐modified phenolic resin for offset inks

Zhengqing Wang, Piying Gao, Pin Chen

The synthetic reaction of rosin‐modified phenolic resin used as a vehicle for offset inks was studied. The two‐step synthetic process to feed resol by dropping was adopted to…

Studies on the particulation and percolation in ultrafine ceramic reinforced barrier layers

D. Mukherjee, R. Mahata, S. Anand Venkatesh, V. Ganesh, T. Anandharaj, Amitaba Sarkar, J. Mathiyarasu, N. Palaniswamy

Discusses the particulation of organic barrier layers, based on laboratory‐bench data, obtained from the exposure of painted panels in low, high or neutral pHelectrolytes. It also…

The influence of the solubility of zinc phosphate pigments on their anticorrosive behaviour

G. Blustein, B. del Amo, R. Romagnoli

The objective of this work was to study the anticorrosive behaviour of three commercial pigments containing micronized zinc phosphate. The chemical analyses of the pigments were…

Advancing powder coating formulations to meet new performance requirements

Zara Cunliffe

Powder coatings were originally product led, depending entirely on the resins available (epoxy, epoxy polyester). Now more market led coatings are required for specific properties…

24
26
53
Cover of Pigment & Resin Technology

ISSN:

0369-9420

Online date, start – end:

1972

Copyright Holder:

Emerald Publishing Limited

Open Access:

hybrid

Editor:

  • Professor Long Lin