Table of contents
Electrophoretic painting ‐ the way forward
Peter HopeOutlines the current state of the art and the future of electrophoretic protective and cosmetic (EPPC) coatings, in which the author’s company, LVH Coatings Limited, deals. LVH…
Studies on corrosion inhibitors for oil‐well tubular material in acid environments
C. Jeyaprabha, S. Muralidharan, D. Jayaperumal, G. Venkatachari, N.S. RengaswamyTo reduce the corrosion of oil‐ and gas‐well equipment during acid treatment, the acid must be inhibited. The behaviour of N‐80 oilfield material in 15 per cent hydrochloric acid…
The effect of blasting materials on the corrosion of protected steel in sea water
G. Andronikos, P. Valiadis, P. VassiliouDifferent blasting materials were used to blast‐clean a steel surface before it was painted with protective coatings. The materials tested were garnet, dolomite, marble and…
Corrosion inhibition by phenyl phosphonate and Zn2+
S. Rajendran, B.V. Apparao, N. PalaniswamyA formulation consisting of 300ppm sodium salt of phenyl phosphonic acid (PPA) and 50ppm Zn2+ is 95 per cent efficient in inhibiting the corrosion of mild steel in a neutral…
Electrochemical studies on nitrogen ion implanted Ti6Al4V alloy
T. Sundararajan, S. Rajeswari, M. Subbaiyan, U. Kamachi Mudali, K.G.M. NairNitrogen ion implantation on a Ti6Al4V alloy with 70KeV energy was carried out at different doses ranging from 5 × 1015 to 2.5 × 1017ions/cm2. The implanted samples were subjected…
Improvement of anti‐corrosion protection properties of polymeric materials
Oleg L. Figovsky, Freddy A. RommThis study considers the problem of preventing the penetration of corrosion‐active components into the protective coating of various materials. It is shown that inhibitors…
Hexadecyl trimethyl ammonium bromide as an effective inhibitor for the corrosion of steel in sulphuric acid solution
M.M. OsmanThe corrosion of steel in sulphuric acid containing hexadecyl trimethyl ammonium bromide (HTABr) was studied over the temperature range 30‐60°C at different inhibitor…
Laser surface melting for improving intergranular corrosion resistance of cold‐worked and sensitised type 316 stainless steel
U. Kamachi Mudali, R.K. Dayal, G.L. GoswamiThis study used laser melting techniques to improve the intergranular corrosion resistance of cold worked and sensitised stainless steel surfaces. Type 316 stainless steel…
ISSN:
0003-5599Online date, start – end:
1954Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Yu Yan