Pigment & Resin Technology: Volume 27 Issue 5

Strapline:

The international journal of colorants, polymers and colour applications
Subjects:

Table of contents

Solvents ‐ continuing to evolve for the future

N.C.M. Beers, M.J.C.M. Koppes, L.A.M. Rupert

Changes in regulations aiming at reducing the impact that technologies such as coatings, adhesives, cleaners have on the environment is leading to large advances in these end‐use…

Pigment dispersion degree and its evolution in storage

Carlos A. Giúdice, Juan C. Benítez

The current size of individual particles in most pigments is usually below 1μm; this ensures powerful forces of attraction causing the particles to cling to one another forming…

821

New Nordtest method shows contamination on surfaces

Charles M. Hansen

A procedure described in a new Nordtest method NT POLY 176 has been shown to determine relatively easily whether or not a surface is clean. One simply applies a well‐chosen…

197

Refurbishment technology for polymer melt filters: a case study

A.J. Bannan, B.J. Inglis

Melt filtration systems are widely employed across polymer production industries. It is common for the filters used in such systems to be chemically cleaned and reinstalled for…

Computer simulation helps improve design of mixers for photographic reagents

Denny Meredith

Polaroid has improved the design of reactor mixing tanks by using computer simulation to evaluate the shearing, orientation and the circulation of the fluid under alternate mixer…

194
82
55
29
Cover of Pigment & Resin Technology

ISSN:

0369-9420

Online date, start – end:

1972

Copyright Holder:

Emerald Publishing Limited

Open Access:

hybrid

Editor:

  • Professor Long Lin